User manual ONKYO DV-S353

[. . . ] Contents Before Using Your DVD Player 2 DVD Player Getting Started 6 DV-S353 Facilities and Connections 10 Instruction Manual Basic Operation 17 Advanced Operation 20 Thank you for purchasing the Onkyo DVD Player. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Player. Please retain this manual for future reference. Function Setup 28 Others 34 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Actual labels for component video inputs may vary depending on the TV manufacturer. (e. g. , Y, R-Y, B-Y or Y, CB, CR) In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance. PB Y Component signal S-video signal Signal flow 15 Making Connections Optional Audio Connections This DVD Player provides numerous ways to take full advantage of the digital multi-channel sound recorded on DVD and some CD media. Be sure to set Digital Audio Out after connection using the setup menu explained in "Customizing the Settings" starting on page 28. Digital connections Make digital connections from the DVD Player to an AV component that features digital input capability or one or more multi-channel audio decoders to realize the full cinematic experience made possible by the DVD format. This DVD Player features optical and coaxial digital audio output jacks and can output Dolby Digital and DTS bitstreams as well as outputting standard PCM. Make connections from the DIGITAL OUTPUT OPTICAL jack to the digital optical input jack on the AV component using an optical fiber cable (sold separately). Make connections from the DIGITAL OUTPUT COAXIAL jack to the digital coaxial input jack on the AV component using a coaxial cable (sold separately). It is not necessary to make more than one type of digital connection to a single component. When you are making connections to an amplifier or receiver that has internal Dolby Digital or DTS decoding capabilities, set Digital Audio Out to "Dolby Digital" or "DTS" using the setup menu explained in "Customizing the Settings" starting on page 28. When you are making connections to an amp or receiver that has digital input capabilities, but no internal decoder, set Digital Audio Out to "PCM" using the on-screen menu explained in "Customizing the Settings" starting on page 28. Setting Digital Audio Out to any other setting could result in digital noise being output that could cause harm your hearing and may also damage your speakers. Notes · Refer to the instructions supplied with the AV component for details on what digital audio formats it is compatible with. · Even if digital audio connections are made, it is also recommended to make analog connections, because some conditions or media may prohibit digital audio output. To digital input (optical) Optical cable (not supplied) An amplifier or receiver with a Dolby Digital or DTS decorder or digital input jacks Coaxial cable (not supplied) To digital input (coaxial) VIDEO OUTPUT COMPONENT DIGITAL OUTPUT OPTICAL COAXIAL ANALOG OUTPUT L VIDEO PR DVD PLAYER MODEL NO. DV-S353 PB R S VIDEO Y DO NOT connect the power cord until all connections are complete. To audio input An amplifier or receiver with stereo inputs Audio cable (not supplied) Making stereo audio connections Using an audio cable (sold separately), make audio connections from the ANALOG OUTPUT L and R jacks to the corresponding jacks on the stereo component. Be sure to set Digital Audio Out setting to "PCM" using the setup menu explained in "Customizing the Settings" starting on page 28. See page 33 for direct information. Notes · Be sure to match the colors of the plugs on the cable with the corresponding jacks on the DVD Player and the stereo component: red for R (right) audio and white for L (left) audio. · Do not make connections to the PHONO or TUNER jacks on the stereo component. Audio (L) Audio (R) Analog signal Coaxial plug Digital signal Optical plug Digital signal Signal flow 16 Turning on Connecting the POWER The DV-S353 is shipped with the main power (POWER) switch in the on position ( ON). When the power cord is plugged in for the first time, the DV-S353 will automatically enter the standby mode and the STANDBY indicator will light (same condition after step 2 below). POWER STANDBY/ON Notes · Make sure that all appropriate connections have been completed as described on pages 14 to 16. · Turning on the DVD Player may cause a momentary power surge, which might interfere with other electrical equipment such as computers. To prevent interference, use a wall outlet on a different circuit. STANDBY indicator 1 2 Plug the power cord into the power outlet on the wall. Press POWER to switch on the main power. The DVD Player enters standby mode. The STANDBY indicator lights up. Notes · The buttons on the remote controller do not operate if the POWER switch is set to OFF. [. . . ] The playback picture is occasionally distorted. · Copy protection is activated. · The disc is dirty. · It is in fast forward or fast reverse playback. 7 ­ Playback doesn't follow the course of the disc's programs. The picture from the DVD Player doesn't appear on the TV screen. No sound or inaccurate sound is reproduced. · The DVD Player is in repeat playback mode, memory playback mode, or random playback mode, etc. [. . . ]