User manual ONKYO LS5200

[. . . ] 57 E N > Before Start > Part Names > Install > Initial Setup > Playback Supplementary Information | Advanced Setup | Others What's in the box Before Start E N Main unit (TX-L20DWL) (1) DAB/FM antenna (1) Speaker cables (3 m) (2) Front speakers (SKM-648) (2) Spacers for front speakers (8) Subwoofer (SKW-B50) (1) Wall mount bracket for front speakers (2) Screw for wall mount bracket (M5k10) (2) Remote controller (RC-934R) (1), batteries (AAA/R03) (2) 2 > Before Start > Part Names > Install > Initial Setup > Playback Supplementary Information | Advanced Setup | Others E N 0 The power cord must be connected only after all other cable connections are completed. 0 We will not accept responsibility for damage arising from the connection of equipment manufactured by other companies. Furthermore, available services may vary depending on your area of residence. 0 Specifications and appearance are subject to change without prior notice. [. . . ] To check the audio, start playback of the connected device. (Default Value is "0 dB") E N ■ 4. Volume Maximum Volume Headphone Level Set the maximum value to avoid too high volume. select "Off (Default Value)" or a value between "30" and "49". Adjust the output level of the headphones. Name Edit Set an easy name to each input. The set name will be shown on the main unit display. Select a character or symbol with the cursors and press ENTER. Repeat it to input 10 or less characters. "A/a": Switches between upper and lower cases. (Pressing MODE on the remote controller also toggles between upper and lower cases) " ← " " → ": Moves the cursor to the arrow direction. " ": Removes a character on the left of the cursor. 0 Pressing CLEAR on the remote controller will remove all the input characters. After inputting, select "OK" with the cursors and press ENTER. 0 To name a preset radio station, press TUNER on the remote controller, select FM/DAB and select the preset number. 0 This cannot be set if the "NET", "USB" or "BLUETOOTH" input is selected. 38 > Before Start > Part Names > Install > Initial Setup > Playback Supplementary Information | Advanced Setup | Others ■ Audio Select Select the priority for input selection when multiple audio sources are connected to one input selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each input selector button. select the input selector to configure. Note that there are some default values you cannot change. Audio Select "ARC": When giving priority to input signal from ARC compatible TV. 0 The setting can be selected only when "5. [. . . ] Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade names are those of their respective owners. [. . . ]