User manual ONKYO TX-SR600

[. . . ] Contents AV Receiver Before using 2 TX-SR700/700E TX-SR600/600E Facilities and connections 8 Instruction Manual Setup and operation 36 Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference. Remote controller 63 Appendix 76 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] To adjust the speaker levels for multi-channel input sources, you will need to use the CH SEL, LEVEL , and LEVEL buttons on the remote controller. Use the and cursor buttons to select "3. Level Calibration" on the main menu and then press the ENTER button. The "Level Calibration" menu appears. * Menu ***************** 1. Speaker Config 2. Speaker Distance 3. Level Calibration 4. Input Setup 5. OSD Setup 6. Preference * Menu ***************** 1. Speaker Config 2. Speaker Distance 2. Speaker Distance *********************** 3. Level Calibration 4. Input Setup a. Unit :feet 5. OSD Setup b. Front L/R :12ft 6. Preference c. Center :12ft d. Surround L/R : 7ft e. Surround Back : 7ft |ENTER|Quit:|SETUP| Quit:|SETUP| 2. Use the and cursor buttons to select "Unit" and and cursor buttons to select the then use the desired unit of measure. feet: Select if you will enter the distances in feet. meters: Select if you will enter the distances in meters. Use the and cursor buttons to select "Front L/R" cursor buttons to set the and then use the and distance from the front speakers to your normal listening position. Use the and cursor buttons to select "Center" and and cursor buttons to set the then use the distance from the center speakers to your normal listening position. Note: You can only set a distance less than that set for the front speakers and within 5 feet (1. 5 meters) of the front speaker setting. For example, if 30 feet (9 meters) is set for the front speakers, then the center speaker distance can only be set between 25 and 30 feet (7. 5 and 9 meters). Use the and cursor buttons to select "Surround L/ R" and then use the and cursor buttons to set the distance from the left surround and right surround speakers to your normal listening position. Note: You can only set a distance less than that set for the front speakers and within 15 feet (4. 5 meters) of the front speaker setting. For example, if 30 feet (9 meters) is set for the front speakers, then the surround speaker distance can only be set between 15 and 30 feet (4. 5 and 9 meters). * Menu ***************** 1. Speaker Config 2. Speaker Distance 3. Level Calibration 4. Input Setup 5. OSD Setup 6. Preference * Menu ***************** 1. Speaker Config 3. Level Calibration 2. Speaker Distance *********************** 3. Level Calibration 4. Input Setup a. Left : OdB 5. OSD Setup b. Center : OdB 6. Preference c. Right : OdB d. Surr Right : OdB e. Surr Back : OdB f. Surr Left : OdB g. Subwoofer : OdB Quit:|SETUP| |ENTER|Quit:|SETUP| db Note: Speakers that you selected "No" or "None" for in the "Speaker Config" menu will not appear. Use the and cursor buttons to select "Left. " You will hear a pink noise from the front left speaker. 38 Configuring the speakers (1) Remember the volume level of this noise and then press the cursor button. The TX-SR700/700E/600/600E will now emit the pink noise from the center speaker. (2) Using the and cursor buttons, adjust the volume level of the noise from the center speaker so that it is at the same level as that that was emitted from the front left speaker. The TX-SR700/700E/600/600E will now emit the pink noise from the front right speaker. Use the and cursor buttons to adjust the volume of the noise from the front left speaker so that it is the same level as that that was emitted from the center speaker. (4) Use the cursor button to select other speakers and adjust the volumes until all speakers are adjusted to the same level. The pink noise level can be adjusted to anywhere between ­12 and +12 decibels for all speakers in 1-decibel increments. Buttons used for navigating through the menus You can change settings in the Setup Menu using the buttons on the front panel and on the remote controller. The buttons on the remote controller correspond to those on the TXSR700/700E/600/600E as shown below. Buttons on remote controller Buttons on TXSR700/700E/600/600E Displaying the Main Menu and exiting the menu SETUP Selecting a menu or menu item (upper edge of ENTER button) UP MENU Press the RETURN button to return to the main menu. [. . . ] "Not available in Zone 2 mode" (TX-SR700/700E only) Setting not allowed because the Zone 2 mode is turned on. "Only available with Dolby D" No setting other than Dolby Digital can be set. "Not available in this Listening mode" Will not work with the current listening mode. "Not available with this signal" The listening mode cannot be selected with the current input source. [. . . ]