User manual OPTICOM SDVR 1600

[. . . ] DIGITAL VIDEO RECORDER SDVR 4000/8000/1600 SERIES NET VIEW SOFTWARE User's Manual CAUTION Read all precautions and instructions in this manual Disclaimer FX Series DVR before using Server. Save this manual for future reference. Disclaimer This manual has been reviewed thoroughly in order to provide a guide for SDVR Series DVR systems. All statements, technical information, and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted. They are not intended to be, nor should they be understood to be, perfect representations or warranties concerning the products described. [. . . ] After the upgrade is completed, DVR will reboot automatically. SAVE SETUP TO A USB LOAD SETUP FROM A USB User can save the current configuration of DVR to the USB memory stick. Put the USB stick on the front panel and press SEL to start the saving process User can upload the configuration of DVR to another DVR using the USB Memory stick. Put the USB stick on the front panel and press SEL to start the loading process. After upgrade is completed, DVR will reboot automatically and setup value will be applied. VIDEO DELETE DELETE VIDEO AFTER Enable/disable recording limit. Set the limit days for recording to the hard disk drive from 1 to 60 days. 24 Figure 3. 6. 1. Storage setup ­USB UPGRADE Figure 3. 6. 3. Storage setup ­ SAVE SETUP TO A USB & LOAD SETUP FROM A USB 25 4. Live Window In the Live window, video inputs from the cameras are displayed on the configuration of the live setup. Figure 4. 1. 1 shows the layout of the live screen. Various indicators showing the status of the DVR are shown as OSD symbols. Refer to Table 4. 1. 1 for the meanings of the indicators. Figure 4. 1. 1. Indicator ICONS in Live window Indicator Continuous recording in progress Manual recording in progress Sensor alarm recording in progress Motion alarm recording in progress Indicates no alarm event Alarm indicator. When there is an alarm (sensor alarm or motion alarm) in the video channel, this icon will be highlighted in bright red. Indicates that alarm output is activated. Indicates that a network client is connected to the DVR. Indicates that sequencing mode is enabled. Indicates the HDD is being recycled Indicates the percentage of recorded data into HDD Indicates there is no video signal input Description 26 Table 4. 1. 2. Button functions of remote controller in Live window Button Description Select channel to be displayed in full screen mode. Switch between full screen and quad display mode. SEQ RECORD SEARCH Press to start auto sequencing of the screen in full screen mode. (Toggle) Press to start and stop manual recording. Event search /Time line search /Log /Archive search Press to capture a still image. [. . . ] 9 SEARCH CALENDAR Use these buttons to control the ZOOM/ FOCUS features on the remote camera. 10 Timeline Search Window The audio can be turned on or off by clicking the audio icon. 45 APPENDIX 1. How to register DDNS (Dynamic Domain Name Server) If DVR is installed in network using dynamic IP addressing and user want to access DVR with domain name instead of IP address, user should register DVR and domain name with DDNS. 1-1. There are three network types such as DHCP, ADSL, and LAN. B. [. . . ]