User manual OPTICOM VDC22X DATASHEET

[. . . ] This symbol indicates important instructions accompanying the product. WARNING :  To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION :  TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • This apparatus shall always be connected to a AC outlet with a protective grounding connection. • To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. [. . . ] 2. Press and hold the WPS/RESET button on the back panel with a pen tip or similar item for more than 5 seconds. Wait until the indicator blinks in white twice more, and then release the WPS/RESET button. • The icon blinks in red, and then stops blinking and glows in red when the unit accesses the Network Setting mode. 3. To connect the Wireless Audio with Dock to the network, search for "Samsung W_Audio E670 XXXXXXX" in the Wi-Fi Setting list of your WI-Fi device, and then select it. ex) Samsung Galaxy Device or EnG ● connections 4. Open the web browser of the Wi-Fi device, and then type "http://192. 168. 1. 1" into the address bar of the Internet browser. 5. Press or touch Samsung Wireless Audio with Dock Status. 6. The WPS PIN number appears on the bottom of the screen. Note or write down the number, and then turn the Wireless Audio with Dock unit off and then on. 7. Access the Wi-Fi set-up page of your AP (wireless router or modem) using your PC or other Internet ready device, and then set the Wi-Fi settings to the PIN method. Refer to the user's manual of your router or modem for instructions. 8. Type the Wireless Audio with Dock's WPS PIN number into the appropriate field of the Wi-Fi setup page. 9. Press and hold the WPS/RESET button on the back panel of the Wireless Audio with Dock with a pen tip or similar item for more than 10 seconds in the or mode. -- If several Bluetooth devices are simultaneously paired to the Wireless Audio with Dock. -- If the Bluetooth device is turned off, not in place, or malfunctions -- Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, which can cause electric interference. 20 CONNECTING TO BLUETOOTH DEVICES This section explains how to connect the Wireless Audio with Dock to Bluetooth compatible TVs and other Bluetooth devices. EnG To connect the Wireless Audio with Dock to a Bluetooth compatible 2012 Samsung TV (SoundShare) DOCK ● connections Connect <To pair to your TV> To produce TV sound on your Wireless Audio with Dock via Bluetooth connection, you need to pair your system to the Bluetooth compliant TV first. Once the pairing is established, the pairing information is recorded and kept and no further Bluetooth connection message will appear from the next time. Keep the Wireless Audio with Dock and the TV close together before pairing. (It is recommended to pair devices within 1 meter. ) 1. Turn on the Samsung TV and Wireless Audio with Dock. • Set "Add New Device" menu to "On" in the TV. (For more information, refer to the user's guide of TV) Menu ; System ; Device Manager ; SoundShare Settings ; Add New Device. 2. When you change the mode of Wireless Audio with Dock to , a message asking whether to proceed with Bluetooth pairing appears. Select <Yes> on the TV screen, then the pairing with the Wireless Audio with Dock will be completed. • The indicator blinks, and stops blinking. • The Wireless Audio with Dock Bluetooth pairing is complete. <To cancel pairing to your TV> If you want to pair your Wireless Audio with Dock to a TV other than the connected TV, you should cancel the existing pairing in the Wireless Audio with Dock. [. . . ] The main unit ▪▪ When software is upgraded, settings you have made will return to their default (factory) settings. trying again. will turn off automatically after completing the firmware upgrade. We recommend you write down your settings so that you can easily reset them after the upgrade. ▪▪ If the firmware fails to upgrade, we recommend formatting the USB drive in the FAT16 format and then ▪▪ For upgrading purposes, do not format the USB drive in NTFS format. ▪▪ Depending on the manufacturer, the USB may not be supported. [. . . ]