User manual OPTOMA DF-WW9XXXF

[. . . ] 11 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connection Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connecting the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Powering On/Off the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Connect to Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press "Freeze" to freeze or unfreeze the on-screen picture. Press "AV Mute" to mute the built-in speaker. Press "S-Video" to choose S-video source. Press "VGA" to choose source from VGA connector. Press "Video" to choose Composite Video source. User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate Control Panel. 1. To open the OSD menu, press "Menu" on the Remote Control or 2 When OSD is displayed, use p q keys to select any item in the main menu. While making a selection on a particular page, press t u or " " key on the Remote Control or "Enter" on the Control Panel to enter sub menu. 3. Use p q keys to select the desired item and adjust the settings by t u key. 4. Select the next item to be adjusted in the sub menu and adjust as described above. 5. Press " " key on the Remote Control or "Enter" on the Control Panel or "Menu" to confirm, and the screen will return to the main menu. 6. Some Letter-Box DVDs are not enhanced for 16x9 TVs. In this situation, the image will not look right when displayed in 16:9 mode. In this situation, please try to using the 4:3 mode to view the DVD. If the content is not 4:3, there will be black bars around the image in 16:9 display. For this type of content, you can use LBX mode to fill the image on the 16:9 display. If you use an external anamorphic lens, this LBX mode also allows you to watch a 2. 35:1 content (include Anamorphic DVD and HDTV film source) that support anamorphic wide is enhanced for 16x9 Display in a wide 2. 35:1 image. Lamp power and vertical resolution are fully utilized. User Controls Native: This format displays the original image without any scaling. Input Signal Display on Screen Zoom Presstto reduce the size of the image. Pressuto magnify an image on the projected screen. V Image Shift Shift the projected image position vertically. V Keystone Press the t or u to adjust image distortion vertically and make a squarer image. Closed Captioning Select the screen to display closed captioning. Off-the supplied default setting. CC1 I CC2-closed captioning type select. English Display area Picture area User Controls System MenuLocation Choosethemenulocationonthedisplayscreen. LampSettings Choosethismenutoadjustyourdesiredlampsetting. Projection Front-Projection Thisisthedefaultselection. Theimageisprojectedstraighton thescreen. Note Rear-Desktopand Rear-Ceilingaretobe usedwithatranslucent screen. Rear-Desktop Whenselected, theimagewillappearreversed. [. . . ] Remove the three screws from the lamp module. Pull firmly on the module handle to remove the lamp module. To replace the lamp module, reverse the previous steps. While installing, align the lamp module with the connector and ensure it is level to avoid damage. [. . . ]