User manual OPTOMA SV50

[. . . ] If S-Video is not available, connect the composite video output on your VCR to AV1, AV2 or AV3. Connect the RF output of your VCR to ANT-2 of the TV if this is the only output available or if the VCR is located very far away from the TV. If your VCR has a composite video input and you want to record the TV station you are currently watching, you can optionally connect the AV output of this TV to the video input and audio input of your VCR. S-Video S-Video ANT Output SD1 (480i) Y/R Video Video Video Y Y/R HD1 HD2 ANT-1 Input L Audio R L Audio R L Audio R Pb Pb/G Pb/G Pr Pr/B Pr/B MONITOR Output AV1 AV2 H H PC1 Input ANT-2 Input V V PC Audio L Audio R L Audio R L Audio R DVI-D Note Your VCR can only record video if the main TV source is ANT-1 or ANT-2. [. . . ] For better quality, only use composite video when the other options are not available. C onnect the DVD player's analog audio output (left and right channel) to the TV's audio input for the video source intended for DVD player. B S -Video S -Video S D1 HD1 HD2 Y/R Video Video Y Y/R L Audio R L Audio R Pb P b/G P b/G Pr P r/B P r/B A AV1 AV2 H H P C 1 Input V V C L Audio R L Audio R L Audio R P C Audio DVI-D Note If your DVD player has 5. 1 channel output and you want to use the TV speakers as central speakers, you can connect only the central speaker output to either the left or right channel of the TV and then select mono mode on the onscreen display menu for audio. R efer to the "Adjust the Audio" section for more details. Once the DVD player has been properly connected and you are ready to beginning viewing your DVD program, remember to use the remote control to select the video source connected. 17 Your SV50/65 allows you to manually add or remove channels from the lineup. When you press Onscreen Display Menus Setting Your Favorite Channels If you routinely view the same set of channels, you can choose to save those channels in a list of favorite channels. You can then view these channels or scan through the programs on these channels directly by accessing the FAVORITE CH list. A total of 20 favorite channels can be selected. To do so, simply use CH Up or CH Down to tune to your favorite channel , then press Favorite CH Add on your remote control. Similarly you can delete channels you no longer watch frequently by pressing Favorite CH Erase. Program Block Program Block PW Change °ø Select SET UP using the Step 3 ° Notes: Up to 20 Favorite Channels can be stored; ten in ANT 1 and ten in ANT 2. If both ANT 1 and ANT 2 are connected to the same RF source, you can have 20 Favorite Channels in two groups. To see the list of current Favorite Channels, press INFO and VOL °øon the remote control simultaneously. If you attempt to add an 11th Favorite Channel to a list that already contains 10 Favorite Channels, the first channel in the list will be automatically replaced with the new favorite channel added. Once a channel has been successfully added to the Favorite Channels list, the message "Ch Added OK" will be displayed on the screen. Similarly, when a channel has been successfully deleted from the Favorite Channels list, the message "Ch Erased OK" will be displayed on the screen. °ø MENU °ø Enter Alternatively, Favorite Channels can be added or deleted using the OSD: Step 1 °ø While viewing the channel you wish to add to the FAVORITE CH list, press MENU to launch the onscreen display. Step 2 Select FAVORITE CH using the °°ø buttons , then press ENTER. Step 4 Select ADD/ERASE using the °°ø buttons, then press ENTER. The channel being viewed is then automatically added to or erased from the FAVORITE CH list. ° buttons, then press ENTER. 25 27 29 Onscreen Display Menus POP The POP function divides the viewing area into two halves, allowing the simultaneous viewing of two programs in side-by-side windows. Step 1 Press MENU to launch the onscreen display Step 2 Step 3 Select POP using the °°ø buttons, then press ENTER. Step 4 Select SIZE RATIO using the buttons, then use the °°ø buttons to choose the desired size of the new pop-up window. [. . . ] Warning: When replacing the lamp, make s ure that no s crews or other foreign metal objects fall into the dis play's interior as s uch items may caus e fire or electrical s hock. Warning: Do not touch the lamp element as it may break and caus e s erious burns or injuries . L amp C hange Ins tructions - S V 50 F or owners of the S V 50, pleas e follow the ins tructions below when replacing the internal lamp. ! F or owners of the S V 50, pleas e follow the ins tructions below when replacing the internal lamp. 1 R emove the front decorative cover Loos en the three s crews on the lamp unit and pull the lamp module out. (Note: T hes e s crews may be loos ened but cannot be removed from the unit. ) 4 2 Uns crew and remove the lamp module's protective cover. R eplace the protective cover and tighten the s crews . 5 3 Loos en the three s crews on the lamp unit and pull the lamp module out. [. . . ]