User manual ORBIT IRRIGATION 57471 REV G

[. . . ] Off All timer functions are OFF auTO Timer is set for automatic operation and will only water in this dial position SET TIME Set the time of day SET DaTE Set the year, month and day STaRT TIMES Set start times for Programs A and B HOW OfTEN Set the days or interval you want to water HOW LONG Set station run times (0 to 240 minutes) WaTER buDGET Seasonal Adjustment - change station run times all at once ­ 10% to 200% 1 Shows current station while programming or watering 2 Shows current start time while programming 3 Displays active program(s) while programming or watering 4 Y=Year, M=Month, D=Day for setting date 5 Indicates low batteries (replace batteries if showing) 6 Indicates day of week and watering days selection 7 Indicates that more options are available for that dial position by pressing the button NOTE: Use program B only if you want to schedule watering independent of Program A. To quickly switch between AM or PM press . Return program pod to base Note: During battery changes, programming will be preserved for 30 seconds. [. . . ] NOTE: If start times overlap then the second start time will water after the first is finished. Press to select the desired days to water: select either days of the week, interval (every 1 to 32 days), or odd/even days. No watering may occur while in the Off position. NOTE: The % symbol will show on the screen when the value for A or B is anything other than 100%. To manually run a program: Press while dial is in the auTO position. To select only the A or B program, or individual stations: Press to select only A or B program. Press again to set individual watering times for stations. NOTE: Manual watering of a set program (A or B) will only work after programming has been set up. Do not press any buttons for 3 seconds to start the delay. Twist on the protective timer cover tight enough to ensure a waterproof, dirtproof seal. Wait 60 seconds to allow the timer to close all valves. Timer- A device that is responsible for turning an automatic watering system on and off. Program (a or b)- One or more watering stations that share a common programmed watering schedule. Rain Delay- A feature that prevents the sprinkler timer from running it's scheduled watering program for a specific duration. Station (Watering Station)- An area where the watering (irrigation) is all controlled by a single control valve. Valve (Watering or Irrigation Valve)- Used in conjunction with sprinkler timers ­ a convenient way to deliver water to lawns, plants and gardens. Remove plug from the recepticle marked "1" on the bottom of the timer. Insert wire connector into the recepticle marked "1" on the bottom of the timer. [. . . ] Insert wire connector into the recepticle marked "1" on the bottom of the timer. One or more stations do not turn on: Make sure programming is not in Off or Rain Delay mode. Make sure programming is not in Off or Rain Delay mode. [. . . ]