User manual OREGON SCIENTIFIC ATC-2K

[. . . ] Camera Precautions · Waterproof Feature II . Quick Start · Battery Installation · Turning On/Off the Camera · Inserting/Removing the SD Card · Taking Video Footage VII . Menu Settings · Resolution · Sound Recording · Deleting video footage · Setting Date/Time · SD Memory Card VIII . Troubleshooting 1 2 5 6 7 9 11 11 12 13 14 15 17 19 19 20 22 24 25 26 Dear customer, Thank you for choosing the Oregon Scientific ATC-2K. [. . . ] Screw the cover back onto the end of the unit. Make sure the card is inserted correctly. Do not touch the connect terminals on the back of the SD card. The card may be damaged if it is not fully inserted. The card and the data may be damaged if the SD card is inserted or 13 removed while the camera is on. Taking Video Footage 1. Press the 'Movie shutter button' to start recording. (one beeping sound) The time elapsed will be shown on the LCD display. Press the 'Movie shutter button' again to stop recording (two beeping sounds). The length of the video footage will show on the LCD display for 3 seconds, after which the remaining time will be shown (the remaining time is an estimate only). Press and hold the Menu button for 2 seconds to select the desired resolution (640 x 480, 320 x 240, 160 x 120). Press the Menu button again to shift through the icons representing these resolutions (at the top of the LCD display), as described on page 15. The icons will flash until you press Enter to confirm your selection. When the time is shown, you will see 'H' for hour, 'M' for minute, and 'S' for second. If the recording time is long, the video file may be separated into two files automatically. Press and hold the Menu button for 2 seconds (one beeping sound) to start selecting options. You can shift through different shooting modes by pressing the Menu button repeatedly. The LCD will display each mode as you press the Menu button. Press the Enter button to confirm the selection. When you want to exit the Menu Selection mode, shift through the icons by pressing the Menu button repeatedly until the selected icon stops flashing. 5. Deleting video footage To delete the last video footage that was recorded, press the Menu button until the Status LCD displays . Repeat these two steps to individually delete your files. Note: After file deletion, the LCD display will adjust the remaining number of files accordingly. Delete All Video Footage To delete all video footage stored in your camera, press the Menu button until the LCD displays . [. . . ] The letters "Err" will be displayed if the SD card is locked. The remaining time is not accurate -The remaining time is not always accurate, it is an estimate. -The remaining time depends not only on the time recorded, but on the color density of the video footage. Under conditions with high contrast, such as outdoors, the actual time available will be less than under low-contrast conditions, such as indoors. [. . . ]