User manual OREGON SCIENTIFIC AWS888

[. . . ] COLOUR WEATHER STATION MODEL: AWS888 USER'S MANUAL TABLE OF CONTENTS About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Remote unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Place the unit out of direct sunlight and moisture. · Do not place the remote unit more than 30 meters (98 feet) from the main (indoor) unit. · Position the unit so that it faces the main (indoor) unit. Minimize obstructions such as doors, walls, and furniture. · To maximize radio frequency reception for the radio-controlled clock, place the remote unit in a location with a clear view to the sky. You may need to experiment with various locations to get the best reception. CLOCK This remote unit can automatically synchronize the date and time with official time-keeping organizations in Frankfurt (Germany) and Rugby (England). When the unit is within 1500 km (932 miles) of a RF signal, the reception icon will blink during reception. 8 AWS888 English r23 op Black 8 10/14/03, 4:32 PM When the remote unit receives the radio-controlled clock signal and is paired up with the main unit, the clock in the main unit will automatically be updated. RADIO SIGNAL REMOTE SENSOR SEARCHING The RADIO SIGNAL FORMAT switch is located inside the battery compartment. Reception takes 2 - 10 minutes to complete. Once complete, the icon will stop blinking. Strong signal Weak signal No signal Press SEARCH to manually activate search for radiocontrolled clock signal. The tower icon will blink until the clock signal is found or the search period times out. NOTE The remote unit collects RF signals. For best results, place it away from metallic or electrical objects, and in a location with a clear view to the sky. MAIN UNIT SENSOR SEARCHING Press and hold SEARCH for 2 seconds to manually activate sensor searching. The search icon will blink until the remote signal is found or the search period times out. Search for channel signal (shown in Temp-HygroPressure mode): Searching for Sensor Sensor found No sensor found NOTE The sensor search will automatically start when the main unit is reset. GENERAL SETTINGS MODE All settings and display options for this product are accessible from the MAIN MENU. NAVIGATING THROUGH MAIN MENU To access MAIN MENU from any screen press HOME. or Press to highlight a desired option then press ENTER to activate it. CHANGING SETTINGS or to highlight the option you 1. [. . . ] Also, when no adaptor is connected, the icon will be displayed. The battery / adaptor status can be seen on: SAFETY AND CARE Wash the unit with a slightly damp cloth and mild detergent. Avoid dropping the unit or placing it in a high-traffic location. WARNINGS This product is designed to give you years of service if handled properly. [. . . ]