User manual OREGON SCIENTIFIC THE ANEMOMETER WGR968

[. . . ] If you want to see readings for the wind speed, wind direction and wind chill temperature you need to own a WMR112A main display unit. The anemometer is powered by solar transmitter STR938 that is included in the package. 8. Press [RESET] of STR938 after installation and secure the screws again mount the anemometer and its solar transmitter safely in place. SECTION 2 To install it, INSTALLATION The wind speed and direction window on the main unit should read 180° if the main unit is installed. THE SOLAR TRANSMITTER The solar transmitter makes use of solar energy to power the anemometer. [. . . ] The time and date of the record will also be displayed aternatively with "STAMP" icon in the clock window. Press the wind speed and direction window. Press and hold [MEMORY] till a key tone is heard. As for the wind direction, it is displayed in a digital compass with bearing read-outs. OPTIONAL ACCESSORY ITEMS This device is compatible to be used with the following items: - Rain gauge (RGR968) - Baro-thermo-hygrometer (BTHR968) - Outdoor Thermo-hygrometer (THGR968) - Thermo-hygrometer (THGR 268) MAINTENANCE When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: 1. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. Do not clean the unit with abrasive or corrosive materials. Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit. Do not subject the unit to excessive: force, shock, dust, temperature, or humidity. Such treatment may result in malfunction, a shorter electronic life span, damaged batteries, or distorted parts. Do not tamper with the unit's internal components. Doing so will terminate the unit's warranty and may cause damage. The unit contains no user-serviceable parts. Only use new batteries as specified in this instruction manual. Do not mix new and old batteries as the old batteries may leak. Read this instruction manual thoroughly before operating the unit. SPECIFICATIONS Wind Speed Measuring Range Resolution Wind Direction Measuring Range Digital Resolution Graphical Resolution : 0 to 56 m/s (0 to 125. 3 mph) : 0. 2 m/s (0. 4 mph) (typical) WGR968 : Weight Dimension Power STR938 : Weight Dimension Power back up : 15. 17 ounces(430 g) : 295 (L) x 116. 5 (W) x 550 (H) mm (11. 61x4. 59x21. 65 inches) : solar cell (STR938) : 10. 22 ounces(290 g) : 115 (L) x 81 (W) x 138 (H) mm (4. 53x3. 19x5. 43 inches) : 2 x UM3- "AA" size alkaline battery (recommend super lithium battery for weather condition under 0°C) NOTE ON COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC : NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] WARRANTY This product is warranted to be free of manufacturing defects for a period of 90 days from date of retail purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not be possible, contact our customer care department for assistance and a return material authorization. No returns may be made without a return authorization. [. . . ]