User manual OREGON SCIENTIFIC XCABLE

[. . . ] The X-Cable icon in the system tray will look different depending on what function it is performing. Red = no connection detected, or no cable attached Green = connection detected and ready to proceed Flashing red = indicates a problem with the connection, such as an interruption or a printing error Flashing yellow = communicating, or currently in the state of transferring data (i. e. printing or downloading) 2 The Synchronization Process Synchronization occurs when data is transferred back and forth between the Internet, the PC, and the Accelerator Vision. Synchronization is one of the key purposes of the X-Cable as it enables the interaction between the Accelerator Vision and the outside world. [. . . ] You may choose to view your web page here before uploading it to the safe-site. net server. (See also Web Page Designer in the user manual) 5 Word Processor The word processor is used to compose, edit, format, and print documents. You may create documents either on the Accelerator Vision or using this window of the X-Cable software. (See the Accelerator Vision manual for details. ) To save a word document from the PC to your Accelerator Vision · Create a new file and save it. · On your Vision go to Web Area and select the Uplink activity. · Change the flow of data from PC to Accelerator Vision. · Fill in your login name and password and press [ Connect ]. Remarks: Be aware that this transfer will overwrite the word documents on your Accelerator Vision. If your previous files have not been changed on the PC, they will remain as they originally were. Note: Limitations on documents are as follows: file names cannot exceed 13 characters and a maximum of 24 documents can be stored on the Accelerator Vision (depending on the file size). Important: If you delete a document in this window, the corresponding file on the Accelerator Vision will be deleted as well. 6 Address Book The Address Book allows you to store, search for and print contacts stored on the Accelerator Vision laptop. 7 Recovery The Recovery application maintains a set of backups that allow you to view, retrieve, or remove your older data. You can use the Recovery window to undo changes made to your Accelerator Vision's files. You can leave a note about the backup file in the box at the bottom right of the screen. Important: You should use the recovery application only if you have lost data, or if the memory has been reset. Using the backup will overwrite your current files in the Accelerator Vision. Also note that only Word Processor documents, Address Book entries, and web pages are recoverable. To apply the recovery: 1. Highlight a backup file that you want to recover from the left-hand side panel. Then press the button to confirm or button to undo. Go to the X-Cable settings (found in the Uplink activity in the Accelerator), and switch the setting from PC to Accelerator as shown. Press [ Connect ] or [ function ] + [ ] on the Accelerator to begin the synchronization process. 8 Card Viewer With the card viewer you may view and print greeting cards that have been created on the Accelerator Vision. If you wish to type a message on the card you must first use the Accelerator Vision to add the text. Once inside the Card Viewer, select the desired picture by clicking the image. [. . . ] It must be the same in order for synchronization to work. · Check your word processor memory status 1. Check the memory status bar, if the indicator shows nearly 100%, please delete some of your messages to create room for new ones. Check that the number of word documents does not exceed the maximum allowed (24 documents). [. . . ]