Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual OREGON SA880SSWR. We hope that this OREGON SA880SSWR user guide will be useful to you.
Lastmanuals help download the user guide OREGON SA880SSWR.
Detailed instructions for use are in the User's Guide.
[. . . ] When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: 1. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. [. . . ] Read this instruction manual thoroughly before operating the unit. Temperature alarm beep sound when temperature display reaches high limit or low limit of temperature. - The content of this manual is subject to change without further notice. - Due to printing limitation, the displays shown in this manual may differ from the actual display. - The contents of this manual may not be reproduced without the permission of the manufacturer. Pull out the steelprobe and stick it into the material or liquld of which the temperature is to be messured. Button own fast advance the setting (for 5°C or 5°F step up). After high limit temperature setting, press HI button once to return current temperature and "HI" indicator will show on display. after setting , dlide SET/ LOCK switch to LOCK position. When temperature shown on display matches with the high limit temperature setting, temperature alarm wil sound for 1 minute with flashing "DISPLAY" indeator. Temperature alarm can be stopped by pressing HI, LO, ADV. If you do not want to open slide cover to stop alarm, simply slide the switch to position. After low limit temperature setting, press LO button to return the current temperature and the LO indicator will show on display. after setting , slide SET/LOCK switch to LOCK position. When temperature shown on display matches with the low limit temperature setting, temperature alarm will aound for 1 minute with flashing "DISPLAY". Temperature alarm can be stopped by pressing HI, switch to LO, ADV. [. . . ] Make sure positive (+) and negative (-) polarftyie matching with the indication inside the battery compartment. When not is use, make sure probing time slide switch 1/10 is set on 10 sec. This reduces battery consumption about 10 times. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OREGON SA880SSWR
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual OREGON SA880SSWR will begin.
