User manual OSTER BLENDERS

[. . . ] operando bajo el nombre de Jarden Consumer Solutions, Boca Raton, Florida 33431. Printed in U. S. A. SPR092010 Visit us at www. oster. com P. N. 142666 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should be followed, including the following: READ ALL INSTRUCTIONS BEFORE USE To protect against electric shock, do not immerse appliance, cord or plug in water or other liquids. Close supervision is necessary when any appliance is used near children. This appliance should not be used by children. [. . . ] Power Indicator Light ­ Turns on and blinks rapidly indicating unit has power. Auto Shave/Auto Blend ­ Activates auto shaving and blending cycles. Status Indicator Lights · lueLights­Pulseslowlytoindicatewhich B button to press during auto cycle OR remain illuminated during auto cycle. 4. Plug the unit into a standard 120 Volt wall socket. For best results, use store-bought ice that has been out of the freezer between 20-30 minutes. 5. Replace the Ice Reservoir Lid and rotate counterclockwise to the locked position. Add appropriate amount of liquid ingredients to the Blending Jar. Replace Blending Jar Lid and position Blending Jar under the Ice Chute by aligning the chute with the Blending Jar Lid. Push the ON/OFF button to turn the unit on. Power Indicator Light will blink slowly until the ice shaver or blender is placed on Motor Base. 5. Stop Button 4 · edLights­showsproductsafetyinterlocks 5 R are not engaged. Med Button ­ Blender medium speed 9. Periodically check the Ice Melt Reservoir and empty as needed. Customizing Your Drink To make a thicker drink: NOTE: Use LESS liquid when adding ingredients to blending jar. Press and hold the "Pulse" button to add more ice to the blending jar. To stop adding shaved ice, release the "Pulse" button. To blend the added shaved ice, remove the Ice Shaver assembly from the Motor Base and place the Blender assembly on the Motor Base. Hold the "Pulse" button until the desired consistency is achieved. To make a thinner drink: NOTE: Use MORE liquid when adding ingredients to blending jar. If you have already made your drink using the Auto mode, make sure your drink is blended to the desired consistency. Add more liquid ingredients to the Blending Jar assembly. Press and hold the "Pulse" button until the desired consistency is achieved (you may also use the Low, Med, or High buttons to blend your drink). Manual Drink Making Fill the Blending Jar with desired contents, use less ice for thinner drink, use more ice for thicker drink. With Ice Shaver assembly on Motor Base, position Blending Jar under Ice Chute. Press and hold the "Pulse" button until the desired amount of shaved ice is added to the Blending Jar. [. . . ] This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes. IMPORTANT: Your Blending Jar, Shaving and Blending Blades are subject to wear during normal use. Always inspect for nicks, chips, or cracks. Always inspect for broken, cracked, or loose blades. [. . . ]