User manual PACKARD BELL EASY HDD RECORDER 160

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. [. . . ] If you need to keep the video contained in this buffer for future usage, you can save all or part of the buffer (see Past Capture section). If the screen looks like the following picture, the Easy HDD Recorder is in Recording mode. The Easy HDD Recorder will continue to record what is broadcasted live while you are watching previously broadcasted programmes. Use the Next, Previous, FFW and RWD buttons to navigate through the Time Shifting buffer and press Play/OK to play. Press the Angle button to save the entire Time Shifting buffer onto the HDD. Save a title from the Time Shifting buffer (Past Capture) Use the Next, Previous, FFW and RWD buttons to navigate through the Time Shifting buffer and go to the beginning of the title that you want to save on the HDD. Use Next, Previous, FFW and RWD buttons to navigate through the Time Shifting buffer and to the end of the title that you want to save on the HDD. The title saved and all earlier data will be erased from the Time Shifting buffer. 35 hours 68 hours 102 hours 136 hours 170 hours 192 hours Six different record qualities can be set for recording. Higher quality will consume more space on HDD or DVD disc, reducing the overall time that can be recorded. 1 hour 2 hour 3 hour 4 hour 5 hour 17 hours 34 hours 51 hours 68 hours 85 hours 96 hours 53 hours 106 hours 159 hours 212 hours 265 hours 300 hours 85 hours 170 hours 255 hours 340 hours 425 hours 480 hours When recording from a DVD in this manner, the recorder will stop any recording to the HDD. Once the DVD recording is finished, press the HDD button to restart the Time Shifting mechanism. Use the and buttons to highlight the quality setting you want and press the Play/OK button to confirm. Choose the record quality carefully to ensure that there will be enough space available for your recording on the HDD or DVD. The recorder will continue to record until the disc is full or when the Stop button is pressed. To set the recorder to record for 30 minutes only, press the Record/OTR button after recording has started. Each time the Record/OTR button is pressed, an additional 30 minutes will be added to the record time. Insert a recordable DVD into the unit and switch to DVD mode by pressing the DVD button. The following video sources are available: It may take a few seconds to completely stop the recording process, please wait until Stop is displayed on the status bar to switch to DVD mode. If you are in Recording mode, make sure Hard Disc (see onscreen status bar) is selected. In Time Shifting mode, the Easy HDD Recorder will split the recording into several 3-hours titles if the recording is longer than 3 hours. In Time Shifting mode, during the recording you can press the Record/OTR button repeatedly to increase the length of the title you are saving by 30 minutes up to a maximum of 3 hours. [. . . ] Make sure the correct AUDIO input is selected on your TV or amplifier. Connect the power plug into the wall outlet securely. Unplug the power supply and wait for 30 seconds before connecting it to the wall outlet again. If it still doesn't work, try to resume the Easy HDD Recorder to factory settings. [. . . ]