User manual PACKARD BELL EN TE11BZ

[. . . ] All items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal rights or entitlements may be obtained from descriptions made in this manual. Reserves the right to revise or make changes or improvements to this product or documentation at any time without obligation to notify any person of such revisions or improvements. Be liable for any consequential or incidental damages, including but not limited to loss of business profits or any other commercial damages, arising out of the use of this product. [. . . ] A-B Repeat Press the Select button twice to access the setup menu during playback. use the Up/Down arrow buttons to highlight the Mode submenu , and press the Select button. Use the Up/Down arrow buttons to highlight the A-B REPEAT item, press the Select button to mark the start point (A); press the Select button again to display the A-B REPEAT item and then press the Select button for the third time to mark the end point (B). Then the section between the start point and end point will be repeatedly played. Title/chapter repeat - Repeatedly press the Repeat button during playback to repeat title/chapter. TITLE: Press the Select button and then enter the desired title number to jump to a title. CHAPTER: Enter the desired chapter number to jump to the chapter. AUDIO: Select the audio language you want to use, e. Use the arrow buttons to highlight the title or chapter you want to program. press the ADD/CLEAR button to add the title or chapter name to the right panel. Add as many of your favourite titles or chapters as you wish. Please proceed with caution, as this process is irreversible. Press the TIMESHIFT button once to switch to manual recording mode, and press the REC TO button to switch to DVD record source. To set the Recorder to record for 30 minutes only, press the REC/OTR button after recording has started. a message will be displayed on the screen indicating that the Recorder will record for 30 minutes. Each time the REC/OTR button is pressed, an additional 30 minutes will be added to the record time. Recording will continue until the STOP button on the remote control or the Recorder front panel is pressed. Press the remote control Timeshift button once, turn on Timeshift mode, press the Timeshift button twice, switch to manual recording mode to display the chart below. Note: In the display chart, you may press the REC TO button to switch between HDD or DVD Record source. Seven different record qualities can be set for recording. Higher quality will consume more space on HDD or DVD disc, reducing the overall time that may be recorded. 1 hour 2 hours 3 hours 4 hours 5 hours 6 hours Note: Choose the record quality carefully to ensure that there will be enough space available for your recording on the HDD or DVD. [. . . ] Unload batteries, wait for 30 seconds before place them back into the remote control. Make sure to load the disc with label side up. Interference may also make the picture distorted. Time recording does not work DVD±RW disc cannot be edited TV signal has picture or sound interference Distorted picture or black and white picture No digital audio output · The TV channel you want to record is not saved yet, or you have chosen wrong channel number. [. . . ]