User manual PACKARD BELL EN TS11SB QUICK START GUIDE

[. . . ] All items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal rights or entitlements may be obtained from descriptions made in this manual. Reserves the right to revise or make changes or improvements to this product or documentation at any time without obligation to notify any person of such revisions or improvements. Be liable for any consequential or incidental damages, including but not limited to loss of business profits or any other commercial damages, arising out of the use of this product. [. . . ] the AV cable (optional) is colour coded. Yellow plug -------- video terminal (yellow) White plug --------- left audio terminal (white) Red plug ----------- right audio terminal (red) Please make sure that colours of connectors and plugs correspond. Before using your DVD player, please prepare the following: 1. Depending on the connectors that are available on your TV set, you may need an additional cable. please check your TVs documentation for the best possible connection. You may need to use the Video Out and Progressive Scan buttons to set the video output mode correctly. Insert the disc and press the Open/Close button again, the player will automatically recognise the disc type. Press the Power button on the remote control, the unit will switch into standby mode; press the button again to resume. After inserting a disc the unit will start playback. pause button: Prev button: Next button: If there is a DVD disc, the unit will show the menu or the titles. If there is an audio CD, the unit will play the first tune. Super Smart (default) - Combines flag reading with pixel-based motion adaptive processing which dynamically changes the parameters according to the instantaneous picture content, This is the best mode for de-interlacing virtually all source material. Picture Mode Auto - Selects Bob or Weave based on 'flags' that are embedded in If you have connected a stereo amplifier, you should select Stereo, if your amplifier is 5. A test sound will be sent to each speaker. The unit automatically activates a 'bouncing ball' screensaver after a few minutes of inactivity. One MP3 disc can contain up to 10 hours of music. The directory and play mode will only display when SMART NAVI in the Preferences page is set as WITH MENU. Use the direction buttons and OK to browse through the menu. This unit supports both Dolby digital or analogue audio. If your unit doesn't support DTS mode, you should select SPDIF/ RAW or SPDIF/PCM to play DTS discs. If your amplifier/decoder already supports Dolby Digital output, you can select Stereo, L-mono, R-mono, MIX-mono for your amplifier/ decoder. When display is in stop mode, you can use the Repeat and Random buttons to select a display mode. [. . . ] If you have any of the following problems, you could try following methods first. If this doesn't fix the issue then please refer to your Warranty guide: Please confirm to firm connection between the unit & other systems such as TV set etc. A disc can not be played A single sided disc should be placed with the label side up; · please check if the disc is clean. Wipe it gently with a soft cloth from the inside to the outside. [. . . ]