User manual PACKARD BELL ONETWO PW.U6Q

[. . . ] The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on and from pinching. Unplug this apparatus during lightning storms or when unused for long periods of time. [. . . ] Press the Play/OK button twice to access the setup menu during playback. Use the and buttons to highlight the A-B REPEAT item, press the Play/OK button to mark the start point (A); press the Play/OK button again to display the A-B REPEAT item and then press the Play/OK button for the third time to mark the end point (B). Then the section between the start point and end point will be repeatedly played. Title/chapter/disc repeat - Repeatedly press the Repeat button during playback to repeat title/chapter/disc. Press repeatedly to toggle through 4 different playback speeds. Press AUDIO repeatedly to toggle between up to 8 audio languages or sound when the disc is recorded with multi-languages. For Karaoke discs, press AUDIO button to switch between the accompanying music and vocal. Press SUBTITLE repeatedly to toggle between up to 32 subtitle languages when the disc is recorded with multi-subtitles. Press ANGLE repeatedly to toggle between up to 9 viewing angles when scenes recorded in the disc was shot with multiple cameras from different angles. TITLE: Press Play/OK then enter the desired title number to jump to a title. Press the Open/Close button on the front panel of the unit to open the tray. If you want to record your DV material onto the HDD, press the Digital Source button, the recorder will switch to DV mode and the remote control can control the DV camera. You can issue FF, FR, Pause, Play commands for the camera using the Easy HDD Recorder remote control. You cannot change the channel or the source if a recording is active (if the end of the recording segment has not been entered, or in the case of long recording, it has not been reached). If you attempt to change the channel or source, the Easy HDD Recorder will prompt you to stop recording. The segment will be saved on HDD and then the channel or source will be changed. Move cursor to the OK button and press Play/OK to save your settings. Several minutes before the time recording event begins, a dialogue box will appear on your TV screen prompting you to confirm or cancel the event. If you do not make any selection, the timer recording will proceed as scheduled. Make sure the clock is set accurately to your local time. If the recorder is in standby status, it will automatically power on two minutes before the start of the time recording event. a recordable DVD disc can record 360 minutes of programs (SLP quality). [. . . ] Option 2: Press the Play/OK button and use the Navigation buttons to manually enter the Channel or Frequency number. The Easy HDD Recorder can automatically adjust the system time according to the time code it receives from the television station. Only the time code integrated in the first TV channel can be used by the appliance. The TV signal must incorporate a time code for this function to work. [. . . ]