User manual PALM CONNECTIVITY KIT

[. . . ] PalmModem® Connectivity Kit Handbook Copyright Copyright © 1997-2001 Palm, Inc. HotSync, Palm OS, and PalmModem are registered trademarks of Palm, Inc. The HotSync logo, Palm, and the Palm logo are trademarks of Palm, Inc. Other product and brand names may be trademarks or registered trademarks of their respective owners. Disclaimer Palm, Inc. [. . . ] If you want to use a calling card to place the call, select the check box and enter the calling card number. Tap OK. To select Connection Preferences for a modem HotSync operation: 1. Tap the pick list in the upper-right corner and select Connection. Tap the configuration you want to use. Page 8 Setting Up Your PalmModem® Connectivity Kit 5. Tap the Connect to pick list and select Modem. Tap the Via pick list and select Cradle/Cable. Adjust the other options as needed. Dialing Select the Rotary setting only if you are certain that your telephone service does not support TouchTone dialing. Note: When dialing from Europe, the modem supports TouchTone dialing only. Rotary and pulse dialing are not supported in Europe. Volume Controls the modem speaker volume. Chapter 2 Page 9 Details Provides access to the following optional settings: s Speed. Determines the modem speed for downloading data. s Country. Determines the country settings that are used. Flow Ctl. s Regulates the data sent to your modem. If your modem receives more data than its buffer can hold, the modem uses flow control to temporarily stop data transmission. s Init String. This field is used for standard AT commands that enable the modem to perform special functions. 9. Tap OK to save the settings. To prepare your handheld for a network HotSync operation: 1. Tap Options, then tap Modem Sync Prefs. 6. Tap Select Service. Page 10 Setting Up Your PalmModem® Connectivity Kit Tap here Note: See "Network preferences and TCP/IP software" in your handheld handbook for information on creating a network connection. Tap Service and select a service. Tap here 9. Note: Before performing a network HotSync operation, you must enable the network HotSync technology and perform a local HotSync operation. Contact your System Administrator to set up the network HotSync technology, and for additional information, go to this web site: http://www. palm. com. Selecting conduits for a modem HotSync operation The Conduit Setup dialog box on your handheld enables you to define which files and/or applications synchronize during a modem HotSync operation. You can use these settings to minimize the time required to synchronize data with a modem. Chapter 2 Page 11 To change conduits for a modem HotSync operation: 1. Tap Options, and then tap Conduit Setup. Tap the check boxes to deselect the files and applications that you do not want to synchronize during a modem HotSync operation. [. . . ] No customer repairs are possible to the equipment. If you experience trouble with the equipment, contact your Authorized Reseller. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. [. . . ]