User manual PALSON HABANA

[. . . ] - Keep a close watch when the appliance is being used by children or children are nearby. - Unplug the appliance when it is not in use and before cleaning. Do not detach the parts if it is not necessary. [. . . ] - Do not place any of the following materials inside the appliance: paper, cardboard, plastic, etc. kEEP THESE INSTRUCTIONS THIS PRODUCT IS FOR DOMESTIC USE ONLY!BEFORE USING FOR THE FIRST TIME - All of the blender's parts must be cleaned thoroughly before using for the first time (see Cleaning). - Remove the required cord length from the blender base and connect to the mains. ASSEMBLING THE GLASS JAR - Place the rubber sealing washer (4) on the inside edge of the blade unit (5). - Insert the blade assembly in the jar base (6) and the glass jar on top of the blade assembly. Turn the jar clockwise until the blades are firmly screwed to the jar. INSERTING THE GLASS JAR - Make sure that the blender is turned off (selector at "0"). Insert the measuring beaker in the hole in the lid and turn clockwise to lock in position. Speed setting Low High Turbo for low-power use in liquids. for a more solid consistency - for blending liquids and solid foods. For chopping frozen foods; short, powerful pulse movements. (The selector does not remain in the "Turbo" position when released; to use this function, you must hold the selector in this position or turn it repeatedly to this setting. After using the blender, always set the selector to "0" and unplug the appliance. To remove the jar, simply lift it upwards from the motor base. It is not necessary to turn the jar to remove it. [. . . ] mOTOR BASE Never immerse the motor base in water. RINSING / CLEANING THE GLASS JAR Empty the jar and fill it with water. Place the jar on the motor base and turn the selector several times to the "Turbo" setting. [. . . ]