User manual PALSON IRIS

[. . . ] Always disconnect the iron from the electric outlet when filling it with water, emptying it, or when it is not being used. Do not use the iron with a damaged cord or if it has fallen or been damaged. In order to avoid the risk of electric shock, do not disassemble the iron. This product is not permitted for unassisted or unsupervised use by children or others whose physical, sensory, or mental state limits them from using it safely. [. . . ] If you are unsure of a garment's fiber content, test a small area (in an inside seam or hem) before ironing the entire garment. When in doubt, start with a low temperature. If wrinkles are not removed, increase the temperature gradually until you find the setting that provides the best results without damaging the fabric. Do not pass the "MAX" line of the tank so it will not overflow. The automatic shutoff safety function will turn off the iron after 30 seconds if it is not moved in a horizontal position or rather 8 minutes if it is not moved when in a vertical position. Upon activating the automatic shutoff function, the blue light starts to blink. Just shake the iron and the blue light will stop blinking. Wait for the heat light to turn on and it shuts off, meaning the iron has reached the appropriate temperature. If the blue light stops blinking and the heat light does not shut off, the iron has already reached the suitable temperature. Be sure the iron is not plugged into the outlet before filling it with water. turn the steam selector to position "0". Be careful to never fill it above the water tank <<MAX>> line. Adjust the steam position temperature switch ( In this setting, the iron can be used as a steam iron when the heat light is turned off. The light will turn on and off periodically during ironing depending on whether the temperature switch functions correctly. There are a total of 7 positions that allow for steam to be adjusted easily. Put the iron in a vertical position on the rest heel to reorganize the clothing or while it is not being used. Steam will stop upon the iron's being placed on the rest heel. It may be necessary to press the button several times after filling in order to activate it. The extra steam function can be used only when ironing at higher temperatures (from · Vertical iron use: The extra steam function can also be used when the iron is in a vertical position with the goal of removing wrinkles from hanging clothes, curtains, etc. SPRAYER BUTTON USE Whenever there is enough water in the tank, the sprayer button can be used at any ironing temperature switch with steam or dry. Push the button several times to activate the pump while ironing. Using the self-cleaning function is important the first time the iron is used and afterwards at least once a month with the goal of eliminating fouling, etc. [. . . ] pour remaining water , shaking the iron face down. Be sure to empty the iron after using it and once it is cool. Roll up the power supply cord around the iron's heel. Thank you for showing confidence in us by choosing one of our products. [. . . ]