User manual PALSON X3

[. . . ] After reading them, make sure to put them in a place that is easy to access. This appliance is not designed to be used by people (including children) with physical, sensory or mental disabilities or who have no experience or knowledge, except when supervised or have been given instructions on the use of the appliance by the person looking after them. [. . . ] Turn the switch to "O" (off) when you have finished using the appliance. How to use the appliance connected to the cable. Plug the adaptor into the mains socket and the other end directly into the appliance. The red light will come on when it has been plugged into the mains socket. Turn the switch to "I" (on) to use the hair clippers. Turn the switch to "O" (off) when you have finished using the appliance, and then remove the cable from the appliance and from the mains socket. To remove the hair clippers' accessory comb, push it in the direction indicated by the arrows (Fig. Cutting without accessories Cut the hair placing the hair clippers head directly on the hair (Fig. You can adjust the cutting length turning the knob (5) clockwise to increase the length and anticlockwise to reduce it. You can select 5 different lengths from 0. Hold the hair clippers firmly and push the blade with your thumb in the direction indicated by the arrow (Fig. Whilst doing so, hold the blade with the other hand. Make sure that the switch is turned to "O" before attempting to remove the blade. To reassemble the blade, insert the support catch into the blade holder on the hair clippers and push it until it clicks (Fig. [. . . ] Instead, it should be handed over to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent negative consequences to the enviroment and human health, which could otherwise be caused by inappropiate disposal of this product. [. . . ]