User manual PALSONIC MODEL 5159P

[. . . ] OWNER'S MANUAL 51CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 5159P Type Tested Electrical Safety AS/NZS 3250 Lic 4164 Standards Australia APP No: N15959 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents INTRODUCTION Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 NOTES FOR OPERATION Cautions for safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Without using the remote controller, you can directly press VOL or CH or TV/AV button on the set to turn on the TV. *Note: If there are no input signals to the TV when the TV set is on, a blue background will appear on the screen (when B. B (blue back) is set ON. ) After 15 minutes if there are still no signals to the TV, it will enter into standby mode automatically 3. Press the POWER switch to turn off the set completely. If you want to turn off the TV temporarily, press the switch the set to standby mode. Special indication: Last-Mode-Memory: after turning off the power, the last TV mode, picture and sound setting mode and preset channels all are memorised. Therefore, next time you turn on the TV, the TV will work in the previous setting mode. If you directly pressed the main power switch on the TV to turn it off, you must press the main power switch to turn on the TV. . If you pressed the main power switch to turn off the TV when in standby mode, press the main power switch and then operate from the remote controller to turn the TV on. Auto-Power-Off function: there are two kinds of Auto-Power-Off function: 1. If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically turn off after about 15 minutes. However, if the Sleep-timer is operating, it takes precedence, that is, the function of Auto-Power-Off, if no signals received will be ineffective. 6 OPERATION . There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. Tuning in To preset channels (Auto search) Use the AUTO SEARCH function to preset all the active channels in your local area automatically. To enter into menu Press the MENU button repeatedly to call up the POS. Note: The MENU button refers to the MENU button on the remote controller or on the TV set, the or button refers to the or button on the remote controller or CH button on the TV set, the or button refers to the or button on the remote controller or the VOL button on the TV set. POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!. . . . . . AUTO SEARCH 1. Press the or button to select and highlight POS. MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY AUTO MEMORY. !!!!!!. . . . . . 2. Press the button to start the AUTO SEARCH. All active channels will be preset and stored into the memory automatically. After presetting, the TV will return to the first channel program. AUTO MEMORY 5 VHFH !!!!!!. . . . . . STOP 3. During the process of AUTO SEARCH, pressing the button on the remote controller will stop the process and the TV will return to the first channel program. 0 7 OPERATION Tuning in (continued) . Use the MANUAL SEARCH function if desired channels can not be preset with the AUTOSEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions. To preset channels (Manual search) Manual search If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search. 1. [. . . ] The selected language is displayed in red and the screen menu is automatically displayed in that language. ENGLISH 3. Press the MENU button repeatedly to exit the menu. 13 CONNECTING OTHER EQUIPMENT The following describes how to use and connect the TV with other AV equipment. Refer to the owner's manual of the equipment to be connected as well. To connect AV input terminals You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound. If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal (special S-VIDEO type) of the unit. [. . . ]