User manual PALSONIC MODEL 6850TKPF

[. . . ] OWNER'S MANUAL 68CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 6850TKPF Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N15899 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 Main features . Calendar 2 1 Safety precautions Note: This TV set can operate on an AC power of 240V, 50Hz. You must not use a power supply of any other type. When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture. [. . . ] Press V+ or V- to select a program number which you want to swap. Preset * EDIT PROG * PROGRAM TO SWAP 4 10 SCAN MUSIC press V+ select 5 Select TO item, you want toor V- toto. a program number which swap and press V+ to confirm. 6 Highlight SWAPprograms' contents are swapped. Now these two Menu control buttons Repeat the above steps to edit the programs in your favourite order. * To exit the menu, press CALL button or repeatedly press MENU button. 16 Picture adjustment To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. Press button to select the desired picture quality. MILD, DYNAMIC, STANDARD and USER (user-set) can be selected cyclically. Mode MILD DYNAMIC STANDARD USER Picture quality Display soft pictures Display dynamic pictures Display normal pictures The picture quality you set TV/AV MILD DYNAMIC STANDARD USER GAME 1 4 7 0 2 5 8 3 ZOOM 6 CALL 9 MUTE CALL SCAN MUSIC Picture adjustment 1 Press MENU button to display the Picture menu. Menu control buttons Picture BRIGHT 14 CONTRAST 25 COLOR 50 SHARPNESS 41 TINT 0 WHITE TONE NORMAL 2 Press P+ or P- to select item. 3 Press V+ or V- to adjust the level. You can also press Item BRIGHT CONTRAST COLOR SHARPNESS *TINT WHITE TONE button to call up the Picture menu. VV+ darker lighter weaker stronger paler deeper softer sharper purplish greenish NORMAL/COOL/WARM * To exit the menu, press CALL button or repeatedly press MENU button. Notes: Tint is only for NTSC system. The adjustment level is stored in the USER position. 17 Sound controls Adjusting volume TV/AV 1 Use Volume up/down button Press V- button, the volume decreases; Press V+ button, the volume increases. Use button 2 If youMUTE to mute the sound, want MUTE VOLUME 52 GAME 1 4 7 0 2 5 8 3 ZOOM 6 CALL MUTE 9 MUTE press MUTE button on the remote. To resume the sound, press this button again. SCAN MUSIC Making use of Sound menu VV+ Menu control buttons 1 Press MENU repeatedly to display Sound menu. 2 Press P+ or P- to select desired adjusting item. Sound VOLUME AVL 40 ON 3 Press V+/- to adjust the level. Item Volume *AVL Vweaker ON/OFF V+ stronger * AVL: auto volume limit. Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed. Turning "AVL" On lets' you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 18 Timer setting Setting clock time Making use of this function can set the current time for the TV. TV/AV 1 GAME Press MENU repeatedly to display the Time menu. Time CLOCK OFF TIME ON TIME PROGRAM 12:00 - -:- - -:- 0 1 4 7 0 2 5 8 3 ZOOM 6 CALL 9 MUTE CALL 2 Press P- or P+ to select CLOCK. 3 Press V- to set the hour (0-23), press V+ to set the minute (00-59). Note: Before setting the OFF timer and ON timer, please set the CLOCK item first. SCAN MUSIC Setting OFF timer With the OFF timer, the TV will automatically switch to standby mode at a preset time. 1 Menu control buttons In Time menu, press P- or P+ to select OFF TIME. Time CLOCK OFF TIME ON TIME PROGRAM 12:05 13:50 - -:- 0 V2 Press V+ to set the hour (0-23), press to set the minute (0059). Once the preset time has elapsed, the TV will automatically go into standby mode. * To exit the menu, press CALL button or repeatedly press MENU button. 19 Timer setting Setting ON timer/ON program With the ON timer, the TV will automatically turn on to a preset channel at a preset time. Time TV/AV 1 GAME 1 4 7 0 2 5 8 3 ZOOM In Time menu, press P- or P+ to select ON TIME. Press V- to set the hour (0-23), press V+ to set the minute (0059). CLOCK OFF TIME ON TIME PROGRAM 12:09 13:50 18:10 4 6 CALL Time 9 MUTE CALL PROGRAM. 2 Press P- to select set the TV ON Press V- or V+ to program number. CLOCK OFF TIME ON TIME PROGRAM 12:09 13:50 18:10 4 SCAN 3 Press button to switch the TV to standby mode. MUSIC At the preset time, the TV will turn on automatically to the preset channel. Menu control buttons Setting sleep timer Making use of the Sleep timer function allows you to have the set automatically turn off after a preset time, and bring the TV to standby mode. With every press of button the sleep time changes in the sequence of 0 15 30 45 60 75 90 150 120 135 150 165 180 195 210 225 240 0 (minutes) ----. For example, if you would like the TV to auto turn off in 60 minutes, you can press button repeatedly until the screen displays the desired amount of time. If you want to cancel the sleep 60 timer, you can press button repeatedly until 0 displays on the screen. * To exit the menu, press CALL button or repeatedly press MENU button. 20 System setup Setting Blue Screen TV/AV 1 Press MENU repeatedly to display Setup menu. 2 Press P- or P+ to select BLUE SCREEN. CALL Setup BLUE SCREEN PICTURE ENHANCE CALENDAR ON ON GAME 1 4 7 0 2 5 8 3 ZOOM 6 CALL 9 MUTE 3 Press V+ or V- to turn on/off BLUE SCREEN. If the BLUE SCREEN is turned on, the TV will appear a blue screen when there is no input signal. SCAN Setting Picture Enhance MUSIC 1 Enter into Setup menu. Menu control buttons Setup BLUE SCREEN PICTURE ENHANCE CALENDAR ON ON 2 Press P- or P+ to select PICTURE ENHANCE. 3 Press V+ or V- to turn on/off Picture Enhance. Turning on PICTURE ENHANCE can improve the picture quality. Calendar function 1 Setup Enter into Setup menu. 2 Press P- or P+ to select CALENDAR. to enter 3 Press V+interface. into the calendar BLUE SCREEN PICTURE ENHANCE CALENDAR ON ON 2004 FEB * To exit the menu, press CALL button or repeatedly press MENU button. 4 Pressing P+ or P- can check years' calendar forward or backward. Pressing V+ or V- can check months' calendar of some year forward or backward. SU 1 8 15 22 29 MO 2 9 16 23 TU WE TH FR SA 567 34 10 11 12 13 14 17 18 19 20 21 24 25 26 27 28 21 Lock setting TV/AV The Child Lock function blocks the viewing of any channel for which the child lock has been set. [. . . ] Stripes appear on the screen. Check the following items Be sure the power cord is plugged in. Contrast, colour tint are not correctly adjusted Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. Possible interference of electronic interference from another TV set, a computer, an electronics game machine, a broadcast station, etc. This may be caused by reflections from nearby mountains or buildings. [. . . ]