User manual PALSONIC PMCL-521

[. . . ] Instruction manual Micro Component Sound System PMCL-521 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 Controls Before doing anything with the machine, please read the chapter "Installation / connections" Installation / connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4/6 Radio listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Tape playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (5) VOLUME UP/DOWN: To set the volume level. (6) TUNE UP/DOWN: To tune in stations, to set values in programming, to fast reverse or advance tape and CD. (7) SET/PAUSE: For a short pause during recording of a tape or CD play or to advance in a programming (e. g. (8) PRESET DOWN: To select station presets or PTY programme. (9) PRESET UP/PLAY: To start play CD or to start playing tape, to select station presets or PTY programme. (10) CLEAR/STOP: To stop play or to cancel functions and values. (12) REPEAT/PTY SEARCH: To select repeat play for a track in the CD and to enter PTY search function in the RDS. (13) RANDOM/RDS MODE: To select random play for CD and to enter RDS mode in the FM. (1) (3) (5) (6) (7) (2) (4) (8) (10) (11) (13) (9) (12) DISPLAY (1) (2) (3) (4) (5) (6) (7) (8) (9) (16) (10) (11) (12) (13) (14) (15) 1. MULTI FUNCTION 6 RADIO Tuning stations FUNCTION Select the tuner function. BAND pressed until tuning starts. A station is being received. Select the band. MODE TUNE TUNE To find weak stations too, press button on the Remote Control repeatedly while tuning. To find powerful stations quickly, tune automatically keeping either button. Mode button on the Unit is tape mode button (only Auto reverse option). FM stereo broadcasts with too much noise can be switched to mono for less noise. Programming station presets You can store up to 30 FM / 15 AM stations. Find a station as under "Tuning stations". TUNE TUNE SET Selecting station presets Select lower or higher preset numbers. PRESET Store. The system assigns a station to a number beginning with 1, one after another. On the machine select the tuner function and the band by pressing REPEAT/MODE/BAND button. If you try to store a 31st FM / 16th AM station, the display will show "FULL". To clear a preset station, select it, press / CLEAR, then II / SET within 5 seconds. You can use the MODE button of the remote control to switch back to stereo. RDS (RDS option only 7~8 page, only for model with RDS) Receiving FM Stations with RDS RDS (Radio Data System) is a broadcasting service which a growing number of FM stations are now providing. It allows the FM stations to send additional signals along with their regular program signals. For example, the stations send their station names and information about what type of program they broadcast, such as sports or music, etc. When tuned to an FM station which provides the RDS service, the RDS indicator lights up, the station frequency (and then the station name if sent) is displayed. Not all FM stations provide RDS service, nor do all RDS stations provide same services. If in doubt, check with local radio stations for details on RDS services in your area. [. . . ] - Be sure playing / recording heads and tape guiding parts are clean, see bottom of this page. - Cover the safety hole of the cassette with adhesive tape. - Correct source CD, tape, tuner, AUX selected? No CD playing Noise with radio sound - Station not tuned accurately? - Safety lock not removed yet?- Load a CD with the label facing upwards. [. . . ]