User manual PANASONIC 1015

[. . . ] Before reading these instructions, please read the Safety Guide and the Quick Reference Guide enclosed with this unit. Please carefully read these instructions and the enclosed Safety Guide and Quick Reference Guide. Keep all documentation in a safe place for future reference. introduction Introduction Thank you for purchasing a Panasonic Document Scanner. [. . . ] ) Paper thickness for Feeding: KV-S1026C: 20–209 g/m² KV-S1015C: 40–209 g/m² • The height of all the documents on the tray should be less than 5 mm. €¢ With the exception of ISO format cards, the minimum guaranteed feeding length is 70 mm (2. €¢ Single paper feeding is recommended for papers exceeding the legal size length. €¢ A maximum of 3 cards can be loaded on the feed tray. €¢ • The height of the total cards (the total thickness including the embossing on each card) should be less than 5 mm (0. Additionally, the embossing on each card must not get entangled with others. Use the landscape orientation when scanning an embossed card. If the scanning fails, place the card upside down, and then try again. Use the mixed batch card guide (page 37) when scanning mixed media (cards and papers) at the same time. 30 Operating Manual Operation Unacceptable Documents The following types of documents may not scan properly: • Curled, wrinkled or folded documents Documents must also meet the following conditions. ) Feeding direction • • • • • • • • • • *1 Carbon paper Thick or irregular documents such as envelopes Perforated or punched paper Non-rectangular or irregularly shaped paper, such as document with tags Coated paper Torn or frayed documents Extremely smooth, shiny paper, or paper that is highly textured Carbonless copy paper Transparent or partially transparent documents such as OHP sheet and tracing paper Photographs*1 Photographs may become scratched or damaged, etc. Do not scan the following types of paper: • Damaged or notched document/card • Documents out of specified size, thickness, and weight • Documents containing hard attachments such as metal or plastic (ex. clips or staples) • Bound or glued documents • Cloths , metallic sheets , OHP sheets , plastic films , etc. €¢ Document with wet ink or cinnabar seal ink • Thermal or photosensitive paper Operating Manual 31 Operation Notes about documents for scanning • Documents may not be able to be scanned due to poor paper quality, even if the thickness is within the specified limits. If a paper jam or double feeding occurs, try scanning again after doing the following: – Clean the rollers and sensors. €“ Reduce the number of sheets of paper loaded on the feed tray. Notes about double feed detection • This scanner is equipped with an ultrasonic sensor to detect double feeding. 32 Operating Manual Operation Scanning Documents Notice • Make sure to remove paper clips and staples from documents before scanning. Failing to do so can damage the unit, document, or both. €¢ • • • Before feeding, ensure that the document is not creased or folded. If the document is creased or folded, a paper jam or damage to the document may occur. When scanning important documents, confirm that the number of scanned images matches the number of pages in the document. [. . . ] KV-S1026C KV-S1015C Binary Scanning speed*1 (portrait, 200 dpi) Color Resolution Scanning Scanning mode 100–600 dpi (1 dpi step) Optical: 300 dpi / 600 dpi (Automatic switch) Binary, 256 levels grayscale, 24-bit color, MultiStream: Binary & Grayscale, Binary & Color Single touch scan (3 buttons) Place to scan Ultrasonic double-feed detection Double Feed Skip Skip button – Scanning function Compression Width Length Paper Thickness Paper thickness for Feeding Format Card *3 JPEG (color, grayscale) 48–216 mm When feeding one sheet: 70–2, 540 mm When feeding multiple sheets: 70–356 mm 0. ) Size Thickness Operating Manual 61 Appendix Item Feed tray capacity Exit tray capacity Scanning Life*4 Roller replacement*4 Maintenance External dimensions (Width´Depth´Height) Weight Power requirement Scanner Power consumption Scanning Ready Sleep Power OFF Operating Environment Storage Environment *1 KV-S1026C 50 sheets (80 g/m² New Paper) 50 sheets (80 g/m² New Paper) 300, 000 sheets 100, 000 sheets KV-S1015C Clean the rollers, sensors, and scanning glass once a week or every 2, 000 sheets scanned. 303 ´ 177 ´ 137 mm (When the exit tray and feed tray is closed) 2. ) External power supply (AC adaptor) AC100–240 V, 50/60 Hz 17 W or less 4. [. . . ]