User manual PANASONIC AJ-D960

[. . . ] Digital Video Cassette Recorder E AJEG Operating Instructions DEUTSCH ESPAÑOL ITALIANO FRANÇAIS ENGLISH Caution for AC Mains Lead FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. This product is equipped with 2 types of AC mains cable. Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable. ONLY If the plug supplied is not suitable for your socket outlet, it should be cut off and appropriate one fitted. FOR U. K. [. . . ] 3: Time and REC TIME 4: Time and REC DATE (year/month/day) 5: Time and REC DATE (month/day/year) 6: Time and REC DATE (day/month/year) <Notes> 1. Displayed as the mode is DVCPRO_50 for the DVCPRO50 (50 Mbps), DVCPRO for the DVCPRO (25 Mbps), DV for the DV or DVCAM for the DVCAM. An error message appears if a warning or error has occurred when 2 (T&S&M) has been selected as this setting. REC TIME and REC DATE are displayed during DV/DVCAM, playback only. With the DVCPRO50 (50 Mbps) or DVCPRO (25 Mbps) format, the operating mode is displayed. This sets the position of the characters on the horizontal plane for the time code and other super displays output to the VIDEO OUT 3/SERIAL OUT 3 connector. <Note> When setting this item, the DISPLAY SEL status is output to VIDEO OUT 3/SERIAL OUT 3 even if SUPER OFF has been set. However, when the menu is exited, operation complies with the SUPER OFF/ON setting. Also, CHARA TYPE is output to VIDEO OUT 3/SERIAL OUT 3 according to the status set in the menu. This sets the position of the characters on the vertical plane for the time code and other super displays output to the VIDEO OUT 3/SERIAL OUT 3 connector. When setting this item, the DISPLAY SEL status is output to VIDEO OUT 3/SERIAL OUT 3 even if SUPER OFF has been set. However, when the menu is exited, operation complies with the SUPER OFF/ON setting. When the DISPLAY SEL setting causes characters to extend beyond the edges of the screen, the setting value is changed so that the characters are automatically displayed in a position on the screen. This selects the display type for the super display output to the VIDEO OUT 3/SERIAL OUT 3 connector as well as for displays such as the setting menu, etc. 0: White characters against a black background. 1: White characters with a black border. This sets the VTR's recording and playback format. Sets the format in which the tape is to be played back. 1: The format complies with the format recorded on the tape when the DVCPRO mode has been selected as the setup menu item No. <Notes> · When an editing mode has been selected, the "MANUAL" setting is forcibly established for internal operations. · There is no automatic setting in the 525/625 mode. 009 CHARA H-POS 0000 . 15 010 CHARA V-POS 625 mode 0000 . [. . . ] · No guarantees are made for the video and audio signal outputs when a tape on which slow playback signals have been input using SDTI for recording is played back again in the same slow mode. Reference signal generator Source ANALOG TC IN CUE IN MON L Y VIDEO IN REMOTE IN/OUT ON P B OUT OUT R P R REF VIDEO IN ON Recorder REMOTE TC IN CUE IN MON L ANALOG Y VIDEO IN REMOTE IN/OUT ON P B REMOTE OUT OUT OUT R P R ENCODER REMOTE REF VIDEO IN ON REMOTE 75 OFF 75 OFF REMOTE OUT ENCODER REMOTE 75 CH1 CH2 CH3 CH4 OPTION OFF RS-232C DIGITAL AUDIO IN CH1 CH2 CH3 CH4 Y VIDEO OUT 1 PARALLEL P B 1 SDI/ SDTI (OPTION) SDI/ SDTI (OPTION) CH 3/4 2 SDI SIGNAL GND PUSH CH 1/2 PUSH CH 3/4 SERIAL IN SERIAL OUT ~AC IN AUDIO IN CH1 CH2 CH3 CH4 Y VIDEO OUT 1 CH1 CH2 CH3 CH4 OPTION 75 OFF RS-232C DIGITAL PUSH CH 1/2 PARALLEL P B 1 SDI/ SDTI (OPTION) SDI/ SDTI (OPTION) CH 3/4 2 SDI PUSH CH 3/4 SERIAL IN SERIAL OUT ~AC IN 2 AUDIO IN CH 1/2 (WFM) 2 AUDIO IN CH 1/2 (WFM) AUDIO OUT SIGNAL GND P R 3 3 SDI AUDIO OUT P R 3 3 SDI (SUPER) AUDIO OUT (SUPER) (SUPER) AUDIO OUT (SUPER) SDTI signals CUE signals (When dubbing cue signals) Connections involving two units 115 (E) ENGLISH Connector signals VIDEO IN SERIAL IN (DIGITAL) Y, PB, PR (ANALOG) VIDEO IN REF VIDEO IN BNC × 2 BNC × 3 BNC × 2 BNC × 2 Active through (Board, option) Loop-through, 75 termination switch provided (Board, option) Loop-through, 75 termination switch provided VIDEO OUT SERIAL OUT (DIGITAL) BNC × 3 Y, PB, PR (ANALOG) VIDEO OUT BNC × 3 BNC × 3 (Board, option) AUDIO IN SERIAL IN (DIGITAL) AUDIO IN (DIGITAL) AUDIO IN (ANALOG) CUE IN TIME CODE IN BNC × 2 XLR × 2 XLR × 4 XLR × 1 XLR × 1 Active through CH1/CH2, CH3/CH4 AES/EBU format CH1, CH2, CH3, CH4 Pin No. 1 2 3 Signal GND HOT COLD AUDIO OUT SERIAL OUT (DIGITAL) BNC × 3 AUDIO OUT (DIGITAL) XLR × 2 CH1/CH2, CH3/CH4 AES/EBU format CH1, CH2, CH3, CH4 AUDIO OUT (ANALOG) XLR × 4 CUE OUT TIME CODE OUT MONITOR OUT HEADPHONES (front) XLR × 1 XLR × 1 XLR × 2 6. 5 mm RS-422A REMOTE (9P) REMOTE IN/OUT Pin No. 1 2 3 Signal FRAME GROUND TRANSMIT A RECEIVE B Pin No. 4 5 6 Signal RECEIVE COMMON ------ ---- TRANSMIT COMMON Pin No. [. . . ]