User manual PANASONIC AJ-HDC27F

[. . . ] Camera/VTR AJ- P Operating Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] (cursor) YES, and press When the data saving is completed, the following message appears. <CMCR RA/RT > A AD EDWIE RA ED SLC EET : 1 WIE RT SLC EET : 1 CR CNI AD OFG RA UE DT ED SR AA TTE IL WIEO RT K YS E N O n TTE IL 22222222 : button is 10 When the JOG dialthe TITLE: pressed, the arrow (cursor) returns to item. <CMCR RA/RT > A AD EDWIE SLC EET : 1 RA ED SLC EET : 1 WIE RT CR CNI AD OFG TTERA IL ED RA UE DT ED SR AA IL: n T T E 22222222 1 : 5 : 2 : 6 : 3 : 7 : 4 : 8 : : dial button 11 Turn thetoJOGWRITE item. to move the arrow (cursor) the <CMCR RA/RT > A AD EDWIE SLC EET : 1 RA ED SLC EET : 1 RT n WIE CR CNI AD OFG TTERA IL ED RA UE DT ED SR AA T T E 22222222 IL: 1 : 5 : 2 : 6 : 3 : 7 : 4 : 8 : To save the VTR unit's data, open the VTR CARD READ/WRITE screen, and perform steps 11 to 13. If one of the following messages appears when the JOG dial button is pressed, the data cannot be saved. Error message WRITE NG NO CARD (setup card has not been inserted) WRITE NG FORMAT ERROR (formatting error) WRITE NG ERROR (the data cannot be saved) Remedial action Insert the card. The card was formatted by a device other than the unit. Replace it. 14 Press the MENU operations. button to exit the menu The setting menu is cleared, and the displays showing the unit's current statuses appear at the top and bottom of the viewfinder screen. 75 Setup card operations Loading the data saved on the card operations (pages 84 to 86), 1 Perform the menu "CAM CARD READ/WRITE" and display the screen. n A AD EDWIE n< C M C R R A / R T > SLC EET : 1 RA ED SLC EET : 1 WIE RT CR CNI AD OFG TTERA IL ED RA UE DT ED SR AA TTE IL: 1 : 2 : 3 : 4 : Load the data of the selected file. to move the arrow (cursor) to the READ <CMCR RA/RT > A AD EDWIE SLC EET : 1 RA ED SLC EET : 1 WIE RT CR CNI AD OFG TTERA IL ED RA UE DT ED SR AA TTE IL: 1 : 2 : 3 : 4 : 5 : 6 : 7 : 8 : 5 : 6 : 7 : 8 : If the data is given a title when it is saved, the title will also be displayed. <Note> "F_" appears in front of a title which was set in the film mode; "V_" appears in front of a title which was set in the video mode. When the data has been loaded, the unit is set to the operation mode of the loaded data. JOG dial 5 When theappears. button is pressed, the following message <CMCR RA/RT > A AD EDWIE RA ED SLC EET : 1 WIE RT SLC EET : 1 CR CNI AD OFG RA UE DT ED SR AA TTE IL RA ?ED YS E N O : n Select the file No. dial button arrow 2 Turn thetoJOGSELECT item to move the avove (cursor) the which comes READ, and press the JOG dial button. <CMCR RA/RT > A AD EDWIE EET : 1 n SLC RA ED SLC EET : 1 WIE RT CR CNI AD OFG TTERA IL ED RA UE DT ED SR AA TTE IL: 1 : 2 : 3 : 4 : dial button the arrow 6 Turn the JOG and press theto move button. (cursor) to YES, JOG dial When the data loading is completed, the following message appears. <CMCR RA/RT > A AD EDWIE RA ED SLC EET : 1 WIE RT SLC EET : 1 CR CNI AD OFG RA UE DT ED SR AA TTE IL RA O ED K YS E N O n TTE IL 22222222 : : 5 : 6 : 7 : 8 : JOG to 3 Turn 1the 8, anddial buttonJOG select any number from to press the dial button. To load the VTR unit's data, open the VTR CARD READ/WRITE screen, and perform steps 4 to 6. 76 Setup card operations If one of the following messages appears when the JOG dial button is pressed, the data cannot be loaded. Error message READ NG NO CARD (setup card has not been inserted) READ NG FORMAT ERROR (formatting error) READ NG NO FILE (file not found) READ NG ERROR (the data cannot be loaded) Remedial action Insert the card. The card was formatted by a device other than the unit. Save the file data. Data saved by devices other than unit cannot be loaded. 7 Press the operations. MENU button to exit the menu The setting menu is cleared, and the displays showing the unit's current statuses appear at the top and bottom of the viewfinder screen. 77 Cassette tapes Loading a cassette tape there are no cassette 1 Check thattop panel, andcables around theswitch to holder or set the POWER ON. <Note> When condensation has formed inside the unit, the HUMID display lights. Wait until this display is cleared before proceeding with the intended operation. HUMID display Checking for tape slack Gently push in the reel using your finger and turn the reel in the direction of the arrow. If the reel fails to turn, it means there is no tape slack. Ejecting the cassette tape While the power is still on, press the EJECT button to open the cassette holder, and take out the cassette tape. If another cassette is not going to be loaded immediately after this tape is ejected, close the cassette holder. POWER: ON 2 Press the EJECT button. The cassette holder opens. EJECT button Ejecting the cassette when the battery has no charge First, set the POWER switch to OFF to turn off the unit's power. Then turn the power back on, and immediately hold down the EJECT button. The cassette can be removed when there is still some power left in the battery. However, do not repeat this operation. To prevent accidental erasure Set the cassette's tab to SAVE to prevent the recordings on the tape from being erased accidentally. Cassette holder REC SAVE the the part 3 Insertthe cassettetotape and presscassette marked with arrow close the holder securely. <Note> Check that there is no slack in the tape of the cassette. [. . . ] setting procedure, refer to For details on the "Setting the time code" (page 63). 1 Set the VTR SAVE/STBY switch to STBY. MONITOR control, 2 Turn thevolume changes. and check that the 4 Press the VTR START button. speaker Check that the figure on the counter display changes as the tape travels. [. . . ]