User manual PANASONIC CQ-DF802

[. . . ] E N G L I S H 1 Before Use and Preparations Notes for the touch panel When operating You must use your fingers to touch the panel and perform operations. Do not press the buttons too forcefully. If you do so, you may damage or break the glass on the top surface of the touch panel. Do not allow the top surface of the touch panel to be caught by your fingernails or any hard objects. [. . . ] Press [BAND] (;/1) again to cancel. 7 8 9 0 NUMBER MUTE Car Audio [0] to [9] (Track number) DISPLA Y 25 24 CQ-DF802W CQ-DF802W E N G L I S H 11 CD Player (Continued) Menu Setting on CD Player Mode 1 Menu VOL 1 [MENU] MOSFET 2 Submenu MOSFET 3 Setting 50W X 4 MENU [MENU] MOSFET 50W X 4 MENU 50W X 4 MENU VOL VOL Note: Press EXIT /[MENU]/[MENU], [DISP] (display) to return to the regular mode. Press RTN /[RET] (RETURN) to return to the previous display. RAND: Lights during random play. E N G L I S H 12 BAND APM/ ;/ 1 BAND BAND APM/ ;/ 1 APM/ ;/ 1 BAND APM/ ;/ 1 2 SET : Lights during menu play setting. : Lights during CD player menu mode. 1 2 SET 1 (Submenu) RTN EXIT (Setting) 1 Menu Repeat Play Default: REP OFF 1 Press [MENU] during CD playing to display "MODE". 2 Press SET /[SET] to set. 2 Submenu or 1 Press / [%] or [$] to select "REPEAT". 2 Press SET /[SET] to set. 3 Setting Press or /["] or [#] to change setting. : Cancel Direct setting on the remote control unit when the menu is not displayed Press [6] (REPEAT) to change setting. (When you press a button, the screen on the left is displayed for 2 seconds. ) Press or /["] or [#] to change setting. : All the available track plays in a random sequence. : Cancel Random Play Default: RAND OFF or 1 Press / [%] or [$] to select "RANDOM". 2 Press SET /[SET] to set. Press [4] (RANDOM) to change setting. Off: (Displayed for 2 seconds. ) Only for the remote control unit When the menu is not displayed Press [5] (SCAN) to change setting. On: The first 10 seconds of each track plays in sequence. Scan Play Default: Off Off: Cancel (Displayed for 2 seconds. ) Blinks. [DISP] (Display) [5] (SCAN) [4] (RANDOM) [6] (REPEAT) SOURCE PWR BAND RETURN RET MENU FACE S·A DIMMER DISP DIM 1 2 3 4 RANDOM 5 SCAN 6 REPEAT VOL 7 8 9 0 NUMBER MUTE [MENU] [%] [$] (Menu/submenu) ["] [#] (Setting) [SET] Car Audio 26 SE T CQ-DF802W CQ-DF802W 27 E N G L I S H 13 CD Changer Control CD changer functions are designed for optional Panasonic CD changer unit. Preparation: Connect the CD changer, and load a magazine (disc). Note: Loading a magazine when the power is off allows the power to be turned on. Ejecting the magazine when the unit is in the CD changer mode allows the power to be turned off. This unit does not support CD-ROM, CD-R or CD-RW playback through the CD changer. Use the CD changer to listen to normal music CD exclusively. Pausing does not function in the CD changer mode. CD changer mode display Repeat and random indicator (When a CD changer is connected and a magaDisc number Track number zine is in the changer. ) Press SOURCE /[SOURCE] to SOURCE change to CD changer mode. Playback starts automatically. Direct Disc Selection Only for the remote control unit Example: disc number 10 1 Press [, , ] (NUMBER). E N G L I S H 14 2 Press [1] [0]. [. . . ] or 2 Press / [%] or [$] to select "PICTURE". 3 Press SET /[SET] to set. or 1 Press / [%] or [$] to select "S·A". 2 Press SET /[SET] to set. Press or /["] or [#] to change setting. Level up Contrast Allows you to adjust the display contrasts for better viewing. [. . . ]