User manual PANASONIC CQ-DP383U SIRIUS

[. . . ] Keep screwdrivers and other metallic objects away from the disc mechanism and disc. When Car Washing Do not expose the product, including the speakers and CDs, to water or excessive moisture. This could cause electrical shorts, fire, or other damage. Use Authorized Servicenters Do not attempt to disassemble or adjust this precision product. Please refer to the Servicenter list including with this product for service assistance. When Parked Parking in direct sunlight can produce very high temperatures inside your car. Give the interior a chance to cool down before switching the unit on. For Installation This product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30x. Use the Proper Power Supply This product is designed to operate with a 12 V DC, negative ground battery system. Components Operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] : Decrease the volume to 1/10. MUTE KEY Excluding AUX-IN from Source Selection Default: ON Press [MENU]/ [SEL] (MENU) to select "FUNCTION" on the menu display. SET #]/["] or [#] to select Press [BAND] (SET) to activate the function or inactivate it in turn. ON OFF : External input (AUX-IN) is selectable as a source. : External input (AUX-IN) is not selectable as a source. AUX-IN With AUX-IN set to OFF, AUX-IN will not be selected when [SOURCE] is pressed. ( page 12) AUDIO PICTURE FUNCTION Press [P. SET #]/["] or [#] to select Press [BAND] (SET) to activate the function or inactivate it in turn. Security Function When the key in the ignition is turned OFF. The panel removable alarm will be active. When the removable face plate is removed. ( page 33) Security message display Security Function Default: ON S-LED 26 CQ-DP383U SIRIUS CQ-DP383U SIRIUS 27 E N G L I S H 19 Installation Guide Identify All Leads WARNING This installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of potential dangers involved in attempting to install this product. Panasonic Servicenter for Service Directory . . . Keep for future reference in case the product needs servicing. Installation Hardware. . . Needed for in-dash installation. Turn the ignition on to the accessory position, and ground one lead of the test bulb to the chassis. Touch the other lead of the test bulb to each of the exposed wires from the cut radio connector plug. Touch one wire at a time until you find the outlet that causes the test bulb to light. If the bulb also turns off and on, that outlet is the car power lead. If your car is not wired for an audio unit: Go to the fuse block and find the fuse port for radio (RADIO), accessory (ACC), or ignition (IGN). Connect All Leads Now that you have identified all the wires in the car, you are ready to begin connecting them to the stereo unit wires. The wiring diagram ( pages 34j35) shows the proper connections and color coding of the leads. We strongly recommend that you test the unit before making a final installation. You can set the unit on the floor and make temporary connections to test the unit. Use electrical tape to cover all exposed wires. Important: Connect the red power lead last, after you have made and insulated all other connections. [. . . ] Mount the unit securely with the mounting parts, referring to the section on installation. Press [OPEN] to open the panel and press [<] (EJECT). If normal operation is not restored yet, call the store where you purchased the unit or the nearest service station to ask for repairs. Remote Control Trouble Cause/Step Battery poles (i) (j) are reversed. Remote control is in the wrong direction. [. . . ]