User manual PANASONIC CSE21RB4EAW
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PANASONIC CSE21RB4EAW. We hope that this PANASONIC CSE21RB4EAW user guide will be useful to you.
Lastmanuals help download the user guide PANASONIC CSE21RB4EAW.
Manual abstract: user guide PANASONIC CSE21RB4EAW
Detailed instructions for use are in the User's Guide.
[. . . ] Operating the unit within the recommended temperature may save energy. To dim or restore the unit’s indicator brightness, press and hold for 5 seconds. Use remote control within 8 m from the remote control receiver of the indoor unit. 8m
To prevent personal injury, injury to others or property damage, please comply with the following: Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classiﬁed as below:
WARNING Indoor unit and outdoor unit
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. [. . . ] Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. Do not use any combustible equipment in front of the airﬂow outlet to avoid ﬁre propagation. do not expose plants or pet directly to airﬂow to avoid injury , etc. Do not install the unit in oily and smoky areas to prevent damage to the unit. Do not step onto an unstable bench when cleaning the unit to avoid injury. Do not open window or door for long time during COOL/DRY mode operation. Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. New batteries of the same type must be inserted following the polarity stated. CAUTION Indoor unit and outdoor unit
Do not wash the indoor unit with water, benzine, thinner or scouring powder to avoid damage or corrosion at the unit. Safety precautions
How to use
Single split system Multi split system
To select operation mode
Remote control receiver
AUTO - For your convenience • During operation mode selection the POWER indicator blinks. Unit selects operation mode every 10 minutes according to setting temperature and room temperature. COOL - To enjoy cool air • To reduce power consumption during COOL mode, use curtains to screen off sunlight and outdoor heat. DRY - To dehumidify the environment • Unit operates at low fan speed to give a gentle cooling operation. CL OS E
TIM ER ER
POWER (Green) TIMER (Orange) POWERFUL (Orange) QUIET (Orange)
Remote control display
AIR SWING (Orange)
To switch between powerful & quiet
AUTO HEAT COOL DRY
FAN SPEED AIR SWING
POWERFUL: To reach temperature quickly
• This operation stops automatically after 20 minutes. Press the button again or turn OFF the unit to stop this operation. TEMP AIR SWING
POWERFUL/ QUIET FAN SPEED
TIMER ON 1 2
Press and hold for approximately 10 seconds to show temperature setting in °C or °F. SET CHECK CLOCK
Can be activated in all modes and can be cancelled by pressing the respective button again. Press and hold the button until you hear 1 beep, then release to use in forced COOL mode. Press and hold the button until you hear 2 beeps, then release to use in normal COOL mode. Press and hold the button until you hear 3 beeps, then release to use in forced HEAT mode. [. . . ] After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: COOL: ≥ 8 °C HEAT: ≥ 14 °C
For extended non-use • Activate HEAT mode for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth. 8
The following symptoms do not indicate malfunction. Symptom Check
Operation in HEAT/COOL mode is not working • Set the temperature correctly. The unit does not receive the signal from the • Make sure the receiver is not obstructed. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC CSE21RB4EAW
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC CSE21RB4EAW will begin.