User manual PANASONIC CS-NE9LKE

[. . . ] Do not touch the outdoor unit during lightning, it may cause electric shock. REMOTE CONTROL Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries. This unit is still able to operate as a cooler with outdoor temperature as low as -15°C in a nonliving room, such as a computer room, with a room temperature of 16°C or above, and room humidity up to 80%. During cooling operation, when the outdoor temperature drops below -15°C, compressor will be cut off and resume operation again once the temperature rises more than -15°C. [. . . ] FAN mode - To circulate air in the room AUTO mode - For your convenience · During operation mode selection the power indicator blinks. Unit selects operation mode every 30 minutes according to temperature setting, outdoor and room temperature. Detects air quality; e-ion operation activates when air quality is at dirty level. Can be activated even when the unit is turned off. Patrol starts automatically with the unit switched on with Generates negative ions to produce fresh air effect and attract dust which will then be captured at the positively charged e-ion filters. Can be activated even when the unit is turned off. In this condition, fan speed and air swing can not be adjusted. This operation overwrite the operation mode and could be cancelled by pressing . Defrost operation at outdoor unit will result in sudden cold air from indoor unit. Can be activated in all modes and can be cancelled by pressing the respective button again. To turn ON or OFF the unit at a preset time. This operation will stop automatically after 20 minutes. When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is SET resumed) by pressing . Switch off the power supply before cleaning. Do not touch the aluminium fin, sharp parts may cause injury. To ensure optimal performance of the unit, cleaning maintenance has to be carried out at regular intervals. Dirty unit may cause malfunction and you may see error code "H99". Do not touch during operation Wipe the unit gently with a soft, dry cloth. Hold 2 Press and then until you hear one beep, release. [. . . ] For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. [. . . ]