User manual PANASONIC CSRE18JKE

[. . . ] This sign warns of Caution injury or damage to property. Remote Control · Do not use rechargeable (Ni-Cd) batteries. · Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries. · Remove the batteries if the unit is not going to be used for a long period of time. · New batteries of the same type must be inserted following the polarity stated to prevent malfunction of the remote control. Indoor Unit · Do not install, remove and reinstall the unit by yourself; improper installation will cause leakage, electric shock or fire. [. . . ] · Do not install the unit in oily and smoky areas. 3 ENGLISH PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS Auto OFF/ON button · Used when remote control is misplaced or malfunction. Super alleru-buster filter Action Press once. Press and hold until 1 beep is heard, then release. Press and hold until 1 beep is heard, then release. Press again until 2 beeps, then release. INDICATOR POWER TIMER Air Filters Mode Auto Cooling Heating Front panel (Green) (Orange) Airflow direction louver · Do not adjust by hand. Receiver Maximum distances : 8m Remote control display 4 · Please be aware of the OFF indication on the remote control display to prevent the unit from starting/ stopping improperly. TO SET TEMPERATURE · Selection range: 16°C ~ 30°C. · Operating the unit within the recommended temperature could induce energy saving. DRY mode : 1°C ~ 2°C lower than room temperature. TO SELECT OPERATION MODE AUTO mode - For your convenience · During operation mode selection the power indicator blinks. · Unit selects operation mode every 30 minutes according to temperature setting, outdoor and room temperature. HEAT mode - To enjoy warm air · Unit takes a while to warm up. The power indicator blinks during this operation. COOL mode - To enjoy cool air DRY mode - To dehumidify the environment · Unit operates at low fan speed to give a gentle cooling operation. TO SELECT FAN SPEED (5 OPTIONS) · To turn ON or OFF the unit at a preset time. Select ON or OFF timer. Set the time. Confirm. or then · To cancel ON or OFF timer, press press . · When ON Timer is set, the unit may start earlier (up to 30 minutes) before the actual set time in order to achieve the desired temperature on time. · Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Remote Control Preparation at back cover. · If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is resumed) by pressing . OPTIONAL SETTINGS Press and hold for 5 seconds to dim or restore the unit's indicator brightness. Press and hold for approximately 10 seconds to show temperature setting in °C or °F. Press and hold for approximately 5 seconds to show 12-hour (am/pm) or 24hour time indication. Press to restore the remote control's default setting. [. . . ] Sélectionnez le mode de fonctionnement souhaité. Wählen Sie die gewünschte Betriebsart aus. Selezionare la modalità desiderata. Seleccione o modo de funcionamento pretendido. [. . . ]