User manual PANASONIC CUE24LKE

[. . . ] Do not insert your fingers or other objects into the air conditioner indoor or outdoor unit, rotating parts may cause injury. Do not touch the outdoor unit during lightning, it may cause electric shock. REMOTE CONTROL Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries. This model is not suitable for 24 hours non-stopping operation in heating mode below -5°C. [. . . ] ⷠCan be activated even when the unit is turned off. ⷠPatrol starts automatically with the unit switched on with Generates negative ions to produce fresh air effect and attract dust which will then be captured at the positively charged e-ion filters. ⷠCan be activated even when the unit is turned off. In this condition, fan speed and air swing can not be adjusted. Can be activated in all modes and can be cancelled by pressing the respective button again. This operation reduces air dryness and provides you with a comfortable living environment during COOL mode only. ⷠWhen vertical airflow direction is set to AUTO, it stops at lower position to avoid cold air contact. However, you can adjust the louver direction manually. Can not be activated during "MILD DRY COOLING" operation is activated. tO SET THE TIMER · 2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset time. ⷠComplete below procedures to set each timer: This operation will stop automatically after 20 minutes. Set the Confirm time Example of application at living room: Morning: ON at 07:00 (Wake up) OFF at 08:00 (Out for work) Evening: ON at 17:00 (Back home) OFF at 22:00 (Sleep) ON To cancel ON or OFF timer, press or OFF to select respective or then press CANCEL. If timer is cancelled manually or due to power failure, ON you can restore the timer again by pressing or SET to select respective or then press . oFF Upcoming timer will be displayed and will be activated in sequence. When ON Timer is set, the unit may start earlier (up to 30 minutes) before the actual set time in order to achieve the desired temperature on time. Switch off the power supply before cleaning. ⷠDo not touch the aluminium fin, sharp parts may cause injury. Do not use water hotter than 40°C. To ensure optimal performance of the unit, cleaning maintenance have to be carried out at regular intervals. Dirty unit may caused malfunction and you may retrieve error code "H99". Do not touch during operation Do not hit or violently press the sensor or poke it with a sharp object. This can lead to damage and malfunction. [. . . ] Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. [. . . ]