User manual PANASONIC CZ02RT11P

[. . . ] Before initial operation, contact your dealer to obtain all details concerning your air conditioning installation. A maximum of 5 actions can be programmed for each day of the week (totalling 35 actions), · Schedule timer can be enabled/disabled at any time, · linked to a set temperature or a LIMIT operation or an OFF operation , · "last command" overrules previous command until next scheduled command. - Never let the remote controller get wet, this may cause an electric shock or fire. - Never inspect or service the remote controller yourself, ask a qualified service person to do this. [. . . ] refer to "Manual operation" on page 5. The next programmed action (in the schedule timer) will return control to the schedule timer. The schedule timer can order 3 actions: 1 switch on the installation at a scheduled time, in combination with a setpoint (exact temperature control) 2 switch off the installation (end of control) 3 switch on the installation at a scheduled time, in limit operation The schedule timer can accept a maximum of 5 actions per day. For each day of the week a maximum of 5 actions can be programmed, totalling a maximum of 35 programmed actions. The action that was programmed first for a certain day is action 1, the last programmed action for a day could be action 1 (in case only one action is programmed for that day) to 5. It is of utmost importance to understand that the number assigned to the programmed action, DOES NOT DETERMINE WHEN the programmed action will be executed. Only the TIME, being a part of the data entered when programming the action, will determine when the programmed action will be executed. Switch off the installation (the schedule timer remains enabled and reactivates the installation as programmed); the operation lamp will turn off, cool or heat, whichever is required to keep the room temperature within a specified range (limit operation); and are displayed. To be able to verify the programmed actions, you can browse the programmed actions, see below. The parameters listed above can be set manually, without interfering with the schedule timer. More sophisticated remote controllers are available. Consult your dealer for more information. Only 2 buttons are used to browse the entire schedule timer program. The button is used to start browsing, to display the next programmed action or to exit browsing when displaying the last programmed action. The button is used to exit browsing at once (without having to scroll through all programmed actions). press the button to enter the browse mode , the icon appears , will blink. NOTE Browsing always starts on Monday and ends on Sunday. Continue pressing the button until the day of the week indicator displays the current day (not blinking), you have now quit browsing. NOTE The number of times that the button will have to be pressed to quit browsing depends on the number of programmed actions in the schedule timer. The clock indicates the time when the programmed action is scheduled, either , or and is being displayed. NOTE The temperatures mentioned above are for clarifying purposes only, temperature values on your controller may vary. To be able to understand the behaviour of your installation when the schedule timer is enabled, it is important to look at all programmed actions for the current day and maybe the last programmed action of yesterday. [. . . ] Browse to the programmed actions using the button, select the day and action you want to edit. Select the "last action" using the button and decide if you do or do not want to copy the programmed action(s) to the next day (pressing the and buttons simultaneously or only the button for 5 seconds). When all data for the schedule timer actions for Monday are entered, you must confirm the programmed actions. Make sure the last schedule timer action you want to keep is selected (schedule timer actions with a higher number will be deleted). [. . . ]