User manual PANASONIC CZ-CSWWC2 SOFTWARE

[. . . ] Air Conditioning Intelligent Management System Système intelligent de gestion de la climatisation Klimaanlagen Intelligentes Verteilungssystem Sistema di gestione intelligente per impianti di condizionamento Sistema de Gestão Inteligente de Ar Condicionado Sistema de gestión inteligente del aire acondicionado Operation Manual Manuel d'instructions Betriebsanleitung Manuale d’uso Manual de Operação Manual de funcionamiento CZ-CSWWC2 CZ-CSWWC2 Web Software Logiciel Web Web-Software Software Web Software de Web Software de Web • After reading it, store it, in a convenient location for easy reference. • Après l'avoir lu, rangez-le en lieu sûr afin de pouvoir vous y reporter facilement. • Bewahren Sie sie danach an einem Ort auf, an dem Sie schnell auf sie zugreifen können. • Dopo la lettura, conservarlo in una posizione comoda per farvi riferimento facilmente. [. . . ] For example, if both the and the display shows only current alarms that are unconfirmed. are checked, the Selecting the indoor unit to display refines the display to cover only that indoor unit. Click by the Search dropdown list to display the registered I/D units. Click on the indoor unit to display. History is displayed for the selected indoor unit. The and can be used together to display only alarms for the selected indoor unit, or only unconfirmed alarms. * Select the blank at the top of the list to return to display of all logs. 4-5-2-3. Display range term specification method button to display the Term Setting screen. Click the Specify the start and end dates. Log is displayed for the specified range. * Set an end date that is later than the start date. Results will not be displayed correctly if the end date is earlier than the start date. 24 Specify the display term, and then click the button to display history throughout the specified term. To close the Term Setting screen, click the button. To cancel the term setting and display the latest log, click the button without specifying a term. * Once a term is specified, the term specification will be as same as previous one when this screen is displayed again. * The maximum number of display items is 2, 000. 4-5-2-4. After confirming alarms, the operator should add check marks to those alarms to manage their status. Alarm confirmation Click in the Confirmation column for the confirmed alarms to add check marks. Click the operator column to display the screen shown below. Click and select the name of the operator. Click closes. The selected name is set in the Operator column and the screen to close the screen. * This setting can only be changed by an Administrative user. * Alarms cannot be confirmed just by checking the Check column and registering the operator name. 25 4-5-2-5. The displayed alarm information can be downloaded. The following shows how to save the data. (1) Click to display the File Download screen. Downloading alarm log The Information Bar may be displayed due to the Internet Explorer security settings. If the Information Bar appears, follow the instructions displayed. A message “Did you notice the Information Bar?” may be displayed, as shown to the right. (2) Click to download the data and display it in Excel. If Microsoft Excel is not installed, the data is displayed in Internet Explorer. In this case, it may not be possible to display some characters, depending on the language. [. . . ]  DHCP A protocol that automatically assigns necessary information such as an IP address to a computer which temporarily connects to the Internet. Information such as Gateway server IP addresses, DNS server IP addresses, and IP address ranges that can be assigned to a subnet mask and client is set in the DHCP server. The DHCP server provides this information to a computer accessing the Internet via a dial-up connection or some other method. When the client ends communication, it automatically recovers the address and assigns it to another computer. [. . . ]