User manual PANASONIC CZTAW1

[. . . ] This indication shows the possibility of causing injury or damage to properties. The items to be followed are classified by the symbols: Symbol with white background denotes item that is PROHIBITED from doing. Symbol with dark background denotes item that must be carried out. ––This can cause electric shock. [. . . ] 3) Enter the Device ID which is written on the side of the adaptor. ˆ∙Skip the letter “-” when entering the Device ID. Com ∙∙There is no charge for using this application. Other charges may be incurred for connection and operation, however. ˆ∙Updates to the service may mean there are changes to the design of the screen and display. ˆ∙You will need a Panasonic ID in order to use the application. If you have not yet registered, first obtain a register for a Panasonic ID (free) by either following the link on the login page or at the following URL. ˆ∙If you forget the password for the device, you can reset the adaptor and then re-register it. 7 “Switch Operation Chart” ∙∙You can give a name and zone name to the indoor unit that helps you identify it. 2 Register both the adaptor and the indoor unit. 1) Press the Register/Reset switch on the adaptor to enter the user registration mode. (The mode remains active for 30 minutes. ) Register/Reset switch 2) Log into the service using the Panasonic ID you have already obtained. 5 To register an additional user on the indoor unit Multiple users (family members, for example) with different Panasonic IDs can access the same indoor unit. –■ Reading LED Lamps Power LED Status LED Link LED 1 Additional user operations 1) Log into the service using the Panasonic ID of the additional user. 2) Enter the Device ID and Device password that was registered by the owner (the user that initially registered). 3) Enter a message requesting approval from the owner. ˆ∙Enter a message so that the owner can identify the person making the request. The lamps light and blink to notify you of the communication status and possible errors. 2 s Lighting: LED Status and Solution A2W power off or cable not connect A2W power on before soft wake up OFF: LED Blinking: Status and Solution LAN (IP has not been acquired) (Blue or Green Blinking) LAN (IP Retrieving) (Blue or Green Blinking) 2 Owner (the user that initially registered) operations 1) Log into the service using the Panasonic ID of the owner (the user that initially registered). ˆ∙If there is a message requesting registration from an additional user, a “   ” is displayed at the top left of the Top page. 3) Select the appropriate privileges for the user and approve their request. [. . . ] Disposal of Old Equipment Only for European Union and countries with recycling systems This symbols on the products, packaging, and/or accompanying documents means that used electrical and electronic products must not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local municipality. [. . . ]