User manual PANASONIC DMC-GX80EB

[. . . ] DMC-GX80 SQC0410 Quick Guide for 4K Photo Using the 4K Photo function to capture the best shot of the subject ([4K Burst] / [4K Burst(S/S)] / [4K Pre-Burst]) You can select the desired moment from a burst of pictures taken at 30 frames/second and save that moment as a picture of 8 million pixels (approx. ). 1 Recording 4K photos 1 Press [ ]. 2 Press the cursor buttons / to select the recording method, and press [MENU/SET]. [ For capturing the best shot of a fast-moving subject (e. g. , sports, aeroplanes, trains) [4K Burst] Burst recording is performed while the shutter button is pressed and held. [. . . ]  When using an SDHC memory card, you can continue recording without interruption even if the file size exceeds 4 GB, but the motion picture file will be divided and separate files will be saved for playback.  When using an SDXC memory card, even if the size of a motion picture exceeds 4 GB, you can record it as a single file.  When recording 4K photos, the angle of view is narrower.  If the surrounding temperature is high, or a 4K photo is recorded continuously, or the temperature of the camera rises, [ ] may be displayed and recording may stop halfway through to protect the camera.  When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera temperature rises. Select [ ] (4K Pre-Burst) only when recording. MC262_SQC0410_4KPHOTO_EB_eng. indd 1 2016/03/17 20:04:44 To record the subject with reduced blur Set the mode dial to [S]. Set the shutter speed by rotating the rear dial or the front dial.  Approximate shutter speed for outdoor recording in fine weather conditions: 1/1000 seconds or faster. This may result in more visible noise on the screen. Adding markers to select and save pictures ([4K Burst(S/S)] only) You can add markers if you press [Fn1] during recording. You can skip to the positions where you added markers on the slide view screen or 4K burst playback screen. 2 Selecting pictures from 4K burst file and saving 1 Press [ ]. 2 Press the cursor buttons / to select a 4K burst file. 3 Press the cursor button .  4K burst files are displayed with [ ]. 4 Drag the frames to select the frame you want to save as a picture.  You can display the previous or next 45 frames in slide view by touching [ Burst(S/S)] only). ]/[  The slide view screen for selecting pictures will be displayed. ] ([4K Burst]/[4K Fn3 Fn1 When a file with long burst time is selected ([4K Burst]/[4K Burst(S/S)] only): We recommend that you make a rough selection of scenes using the 4K burst playback screen first, and then select the frame you want to save as a picture using the slide view screen. Press [Fn3] to display the 4K burst playback screen. [. . . ] Parts of the image that are brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture. Refer to the “Basic Operating Instructions” for details. MC262_SQC0410_4KPHOTO_EB_eng. indd 2 2016/03/17 20:04:45 [. . . ]