User manual PANASONIC DMRBW780EB

[. . . ] Operating Instructions Blu-ray Disc Recorder Model No. DMR-BW880 DMR-BW780 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] To deregister equipment After selecting "Manual" in step : ( Linked operations with the TV (VIERA Link "HDAVI ControlTM"/Q Link) What is VIERA Link "HDAVI Control"? VIERA Link "HDAVI Control" is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or receiver under "HDAVI Control". You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details. Preparation 1 Connect this unit to your TV or receiver using an HDMI cable. ( 8) 2 Set "VIERA Link" to "On" ( 83). (The default setting is "On". ) 3 Set the "HDAVI Control" operations on the connected equipment (e. g. , TV). Set the input channel on the VIERA to suit the terminal to be used as "HDAVI Control". 4 Turn on all "HDAVI Control" compatible equipment, then select this unit's input channel on the connected TV so that the "HDAVI Control" function works properly. Also when the connection or settings are changed, repeat this procedure. Convenient functions Automatic input switching Power on link [VIERA]Link] [Q]Link] When the following operations are performed, the TV will automatically switch the input channel and display the corresponding action. Additionally when the TV is off, the TV will automatically turn on. ­ When play starts on the unit ­ When an action that uses Direct Navigator or Function Menu etc, is performed Power off link [VIERA]Link] [Q]Link] When you set the TV to standby mode, the unit is also automatically set to standby mode. Power off link function does not work when recording, copying, finalising etc. Playing music continuously even after turning off power to the TV§1 [VIERA]Link] The following operations make it possible to keep the power of the unit ON and to play music continuously. When the unit is connected to an amplifier/receiver supporting VIERA Link. What is Q Link? Q Link is a convenient function that offers linked operations of this unit and a Panasonic TV. You can use this function by connecting the equipment with a fully wired 21-pin Scart cable. Preparation Connect this unit to your TV with a fully wired 21-pin Scart cable. For your reference The following systems from other manufacturers have similar functions to Q Link from Panasonic. For details, refer to your TV's operating instructions or consult your dealer. Q Link (registered trademark of Panasonic) DATA LOGIC (registered trademark of Metz) Easy Link (registered trademark of Philips) Megalogic (registered trademark of Grundig) SMARTLINK (registered trademark of Sony) 1 While playing music Press [OPTION]. 2 Select "TV Power Off", then press [OK]. Sound may be discontinued for several seconds when the power to the TV is turned off. Direct TV Recording§2 [VIERA]Link] [Q]Link] You can immediately start recording the watching programme on the TV without switching the channels on this unit. Refer to page 23 for operation. PAUSE LIVE TV §2 [VIERA]Link] You can pause the TV programme you are watching and resume later by temporarily saving it on the HDD. Refer to page 20 for operation. 68 VQT2J65 Easy control only with VIERA remote control§1 [VIERA]Link] You can operate this unit using buttons on the TV remote control. Refer to the operating instructions of the TV about the buttons that you can use. Using the OPTION MENU By using the TV remote control, you can play discs using the "Control Panel" ( below). 1 Press [OPTION]. [. . . ] This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone. The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. [. . . ]