User manual PANASONIC DPMB350

[. . . ] Quick Reference Guide Multi-Function Printer Model No. DP-MB350 Do NOT connect the unit to a computer with the USB cable until prompted to do so during the setup of Multi-Function Station (CD-ROM). 1 2 Accessory information: To ensure that the unit operates properly, we recommend the use of Panasonic toner cartridge and drum cartridge. Replacement accessory ­ Toner cartridge L Model No. (Part No. ): DQ-TCB008 ­ Drum cartridge L Model No. (Part No. ): DQ-DCB020 Optional accessory ­ Lower input tray L Model No. [. . . ] Do not defeat this safety feature by tampering with the plug. Operating safeguards Turn the power switch OFF before cleaning. Do not cover slots and openings on the unit. They are provided for ventilation and protection against overheating. Never place the unit near radiators, or in a place where proper ventilation is not provided. 4 Detailed operating instructions are on the CD-ROM. 1. Important Information Never push any objects through slots in this unit. This may result in the risk of fire or electric shock. To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used. Follow all warnings and instructions marked on this unit. Do not spill liquids (detergents, cleansers, etc. ) onto the telephone line cord plug, or allow it to become wet at all. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Unplug this unit from power outlets and refer servicing to an authorized service center when any of the following conditions occur: L If the power cord is damaged or frayed. L If liquid has been spilled into the unit. L If the unit has been exposed to rain or water. L If the unit does not work normally by following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorized service center. L If the unit has been dropped or physically damaged. L If the unit exhibits a distinct change in performance. USB cable/LAN cable To assure continued emission limit compliance; ­ use only shielded USB cable (Example: Hi-Speed USB 2. 0 certified cable). [. . . ] Important Information Notice: L Install your machine near a supervised area to prevent illegal copies from being made. 1. 5 Display messages To indicate the unit's status, one or more of the following messages will appear on the display. See the operating instructions for details. ­ "Call Service" ­ "Change Drum" ­ "Change Supplies Toner Empty" ­ "Change Supplies Toner Low" ­ "Check Document" ­ "Check Drum" ­ "Check Install Input Tray #1" ­ "Check Paper" ­ "Check Pick Up Input Tray #1" ­ "Directory Full" ­ "Drum Life Low" ­ "Email Size Over" ­ "Fax in Memory" ­ "File Size Over" ­ "Keep Copying" ­ "Left Cover Open" ­ "Low Temperature" ­ "Memory Full" ­ "Memory Overflow" ­ "Modem Error" ­ "No Fax Reply" ­ "Out of Paper Input Tray #1" ­ "Paper Jammed" ­ "PC Fail or Busy. " ­ "Please Wait" ­ "Redial Time Out" ­ "Remove Document" ­ "Replace Drum" ­ "RX Memory Full" ­ "Scanner Position Error" ­ "Transmit Error" ­ "Tray #2 Left Cover Open" ­ "Warming Up" Detailed operating instructions are on the CD-ROM. 7 1. Important Information 1. 6 FCC and Other Information This device complies with Part 15 of the FCC Rules. [. . . ]