User manual PANASONIC ES SL41 S503

[. . . ] ES‑SL41 Before operating this unit, please read these instructions completely and save them for future use. ES-SL41  Before operating this unit, please read these instructions completely and save them for future use. 3 Thank you for choosing a Panasonic shaver ES‑SL41. With our WET/DRY technology, you can enjoy using your Panasonic shaver dry or in the shower or bath for gentle and easy shaving. [. . . ] € Wipe off any water droplets on the side terminals. € If you charge the shaver with power switch turned on, it will start working when you remove from the AC adaptor. € Charging time differs depending on the rated voltage. ) • When charging the shaver for the first time or when it has not been in use for more than 6 months, the charge indicator lamp may not glow for a few minutes, or the operating time may shorten. Please charge it for more than 20 hours in such cases. € To keep charging the battery will not affect battery performance. • Recommended ambient temperature for charging is 0 ‑ 35 °C. The battery may not charge properly or at all under extreme low or high temperatures. 3 Disconnect the plug after charging is completed. 6 • The charge indicator lamp glows and stays on until the plug is disconnected from a household outlet. € A full charge will supply enough power for approx. ) You cannot operate the shaver while charging. Shave Using the shaver 1 Press the power switch [A4]. 2 Hold the shaver as illustrated above and shave. • We recommend using the shaver in an ambient temperature range of 0 - 35 °C. If used outside this range, the appliance may stop operating. Tips for best shaving results Start shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave. You can also use a pen grip to hold the shaver. 7 TR RO H SK CZ PL FIN S N P DK Using the trimmer Slide the trimmer handle up. [. . . ] Attaching the outer foil section After turning the water inlet surface to the front, securely attach the outer foil section [A:] to the shaver, ensuring that it clicks. 2 9 TR RO H SK 1 CZ PL FIN S N P DK ►►Replacing the inner blades E NL I F D GB Cleaning with the brush ►►Replacing the system outer foil Service Contact Please visit Panasonic web site http://panasonic. Net or contact an authorized service center (you find its contact address in the pan‑european guarantee leaflet. ) if you need information or if the shaver or the cord gets damaged. [. . . ]