User manual PANASONIC EUR7659T40

[. . . ] Be careful during removing metal parts, sharp edges. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed. [. . . ] Key operation Front Key Press [STOP], [CH UP] and [OPEN/CLOSE] keys simultaneously for five seconds when power is off. Open the tray, and press [REC] and [PLAY] simultaneously for 5 seconds. When the power is off, press [CH UP], [OPEN/CLOSE] and [REC] keys simultaneously for 5 seconds. When the power is off, press [STOP] and [CH UP] keys simultaneously for 5 seconds. mode name TEST Mode Rating password The audiovisual level setting password is initialized to “Level 8”. Service Mode Setting every kind of modes for servicing. *Details are described in “Service Mode”. Forced disc eject Removing a disc that cannot be ejected. The display before execution The tray will open and unit will shift to P-off leaves. *This command is not effective during "Child lock" is ON. While Demonstration Lock is being set, this Forced disc eject function is not accepted. If this command was executed while TIMER REC is being set, TIMER REC setting will be kept. set or release “Child Lock”. Child lock/unlock Press [ENTER] and [RETURN] by remote controller simultaneously until [X-HOLD] is displayed. While the power is on (E-E mode), press [STOP] and [OPEN/CLOSE] simultaneously for 5 seconds. nTSC/PAL system select To switch PAL/NTSC altemately. Forced power-off When the power button is not effective while Display in P-off mode. Power is ON, turn off the power forcibly. *When Timer REC is ON or EXT-LINK is ON , execute “Forced Power-off” after releasing Timer REC or EXT-LINK. 20 DMR-EX75EG / DMR-EX75EC / DMR-EX75EB / DMR-EX85EG / DMR-EX85EB Item Mode name Aging Description Perform sequence of modes as * Aging Description shown below continually. Caution: All programs in DVD-RAM disc will be deleted because Formatting is done once in Aging process. fL display Display following the then mode. [. . . ] Transfer [9][9] in the service mode setting, and initialize the service settings (return various settings and error information to their default values. The laser time is not included in this initialization). After checking and making repairs, upgrade the firmware to the latest version. Transfer [9][9] in the service mode setting, and initialize the service settings (return various settings and error information to their default values. [. . . ]