User manual PANASONIC EY3641

[. . . ] 5) The appliance is not intended for use by young children or infirm persons without supervision. 6) Young children should be supervised to ensure that they do not play with the appliance. For preparation of sealing compound, such as cutting the opening to the desired diameter, follow the instructions of the cartridge / sausage pack. Before inserting battery pack, check that the power switch in the tool actuates properly and returns to the "OFF" position when released. [. . . ] When charging the battery pack, confirm that the terminals on the battery charger are free of foreign substances such as dust and water etc. Clean the terminals before charging the battery pack if any foreign substances are found on the terminals. The life of the battery pack terminals may be affected by foreign substances such as dust and water etc. When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. When operating the battery pack, make sure the work place is well-ventilated. When the battery pack is removed from the main body of the tool, replace the battery pack cover immediately in order to prevent dust or dirt from contaminating the battery terminals and causing a short circuit. For environmental protection and recycling of materials, be sure that it is disposed of at an officially assigned location, if there is one in your country. If the battery pack is used when the batterytemperatureisbelow0°C(32°F), the tool may fail to function properly. When charging a cool battery pack (below0°C(32°F))inawarmplace, leave the battery pack at the place and wait for more than one hour to warm up the battery to the level of the ambient temperature. Cool down the charger when charging more than two battery packs consecutively. Do not insert your fingers into contact hole, when holding charger or any other occasions. Do not use power source from an engine generator. If the operation time becomes extremely short after recharging, replace the battery pack with a new one. Your battery pack is not fully charged at the time of purchase. Be sure to charge the battery before use. Sparks may be produced when the plug is inserted into the AC power supply, but this is not a problem in terms of safety. Insert the battery pack firmly into the charger. Line up the alignment marks and place the battery onto the dock on the charger. Charging will not start if the battery pack is warm (for example, immediately after heavy-duty operation). When charging is completed, the charging lamp will start flashing quickly in green color. If the temperature of the battery pack is0°Corless, chargingtakeslongerto fully charge the battery pack than the standard charging time. Even when the battery is fully charged, it will have approximately 50% of the power of a fully charged battery at normal operating temperature. [. . . ] [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. [. . . ]