User manual PANASONIC HC-V130GA

[. . . ] If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Warning To prevent electric shock, do not remove the cover (or back); there are no user serviceable parts inside. Refer servicing to qualified service personnel. IF THE POWER CORD OF THIS EQUIPMENT IS DAMAGED, IT MUST BE REPLACED WITH AN ELECTRICALLY APPROVED POWER CORD. Keep the Memory Card out of reach of children to prevent swallowing. IEC 60825-1:2001 CAUTION This product contains a laser diode of higher class than 1. [. . . ] 6 When the confirmation message appears, select [YES], then press the joystick. The thumbnail view screen of the playlist that scenes were added to is displayed. To continue adding scenes to the playlist Repeat steps 1-6. LSQT1025 94 LSQT1025(ENG). book 95 Using playlists Moving scenes The scenes in a playlist can be moved. ¬ Select playlist playback mode. (l 93, steps 1 and 2) 1 Press the MENU button, then select [ press the joystick. EDIT] and 2 Select the playlist to be edited, then press the joystick. 3 Select [ MOVE], then press the joystick. 4 Select the scene to be moved, then press the joystick. The selected scene is encircled by a yellow frame, and the position to insert is shown by a red bar. 5 Select the position to insert the scene, then press the joystick. To continue moving other scenes in the playlist Repeat steps 4-5. To complete editing Press the MENU button. 95 LSQT1025 Editing LSQT1025(ENG). book 96 Using playlists Dividing a scene You can divide a scene into two parts. Dividing scenes on a playlist will not affect the original scenes. ¬ Select playlist playback mode. (l 93, steps 1 and 2) 1 Press the MENU button, then select [ press the joystick. EDIT] and 2 Select the playlist to be edited, then press the joystick. 3 Select [ DIVIDE], then press the joystick. 4 Select the scene to be divided, then press the joystick. The selected scene is played back. Editing LSQT1025 5 When you reach the area where you want to divide the scene, move the joystick down to set the dividing point. Using slow-motion playback or frame-by-frame playback makes it easy to search for the point where you want to divide the scene. (l 82, 83) 6 When the confirmation message appears, select [YES], then press the joystick. To continue dividing other scenes Repeat steps 4-6. To complete editing Press the MENU button. 96 LSQT1025(ENG). book 97 Using playlists Combining scenes Two consecutive scenes can be combined into one. Combining scenes on a playlist will not affect the original scenes. ¬ Select playlist playback mode. (l 93, steps 1 and 2) 1 Press the MENU button, then select [ press the joystick. EDIT] and 2 Select the playlist to be edited, then press the joystick. 3 Select [ COMBINE], then press the joystick. 4 Select the scene to be combined, then press the joystick. The selected scene and the next scene are combined. 5 When the confirmation message appears, select [YES], then press the joystick. To continue combining other scenes Repeat steps 4-5. To complete editing Press the MENU button. 97 LSQT1025 Editing LSQT1025(ENG). book 98 Using playlists Deleting scenes Deleting scenes on a playlist will not affect the original scenes. Deleting scenes one at a time: ¬ Select playlist playback mode. (l 93, steps 1 and 2) 1 Press the button during playback. 2 When the confirmation message appears, select [YES], then press the joystick. Deleting multiple scenes from the thumbnail display: ¬ Select playlist playback mode. (l 93, steps 1 and 2) 1 Press the MENU button, then select [ press the joystick. EDIT] and Editing LSQT1025 2 Select the playlist to be edited, then press the joystick. 98 LSQT1025(ENG). book 99 Using playlists 3 Select [ DELETE] # [ press the joystick. DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. The DPOF setting can be established for up to 999 files. DPOF setting made on other devices may not be recognized by this unit. Please perform the DPOF settings on this unit. You cannot add the recording date to pictures to be printed with the DPOF settings. 103 LSQT1025 Editing To complete the settings LSQT1025(ENG). book 104 Disc and card management Formatting discs and cards Formatting discs and cards Formatting discs This is for initializing discs. (RAM) (-RW<VR>) (-RW<V>) Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ SETUP] # [ FORMAT DISC] # [YES] and press the joystick. When formatting a DVD-RAM, skip to step 3. 2 (When formatting a DVD-RW only) Select format type (l 21), then press the joystick. Disc and card management 3 When the confirmation message appears, select [YES], then press the joystick. When formatting is complete, press the MENU button to exit the message screen. In the case of a double sided disc, format each side. It may not be possible to format a disc with many scratches or dirt. During formatting, do not turn this unit off. When you format the disc, use a battery with sufficient battery power or the AC adaptor. Formatting DVD-RAM: We recommend formatting on this unit. If formatting on a computer, use the supplied software. [. . . ] Due to these characteristics, auto focus does not work correctly in the following situations. Record pictures in the manual focus mode. Recording distant and close-up objects at the same time Since the unit focuses on whatever is at the centre of the screen, it is difficult to bring the background into focus when close-up objects are placed in focus. When recording people with distant mountains in the background, you cannot focus on both the subject which is close-up and the objects which are in the distance. [. . . ]