User manual PANASONIC HDCSDT750EF

[. . . ] As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL Ó OR COLOURED GREEN OR GREEN/YELLOW. THIS PLUG IS NOT WATERPROOF--KEEP DRY. ª Caution for AC mains lead For your safety, please read the following text carefully. [. . . ] (HD mode) The remaining time for playback indication will be reset to "0h00m00s" each scene. The high definition picture quality video signals that can be played back on this unit are 1920k1080/50i or 1440k1080/50i. (HD mode) This unit may degrade or not playback motion pictures recorded or created on other products, and other products may degrade or not playback motion pictures recorded on this unit, even if the products support AVCHD. (HD mode) If you continuously record motion picture data that exceeds 4 GB on an SD card and then play back the data on another device, the picture may momentarily stop where the data has reached 4 GB. If motion pictures recorded on another device with a 4:3 aspect ratio are played back on this unit in STD mode, the images on the LCD monitor and the viewfinder are squeezed vertically. Fast forward/rewind playback Move the cursor button right during playback. (Move the cursor button left to rewind. ) Move the cursor button again to increase the speed. (The screen display changes from 5 to . ) Normal playback is restored when you move the cursor button up. ª Operating with the remote control Press the 6 or 5 button. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP Skip playback (to the start of a scene) (Operation is possible with the remote control only. ) Press the : or 9 button on the remote control during playback. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP VQT1G66 80 Playback Slow-motion playback Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Move the cursor button up during playback to pause the playback. 2 Move and hold the cursor button right. (Slow-motion pictures will be played back in reverse when you move and hold the cursor button left. ) 1 Move the cursor button up during playback to pause the playback. 2 Move the cursor button right. (The frames will be advanced one at a time in reverse when you move the cursor button left. ) Normal playback is restored when you move the cursor button up. When slow-motion pictures are played back in reverse, they will be shown continuously at approximately 1/1. 5th the speed of normal playback in HD mode (intervals of 0. 5 seconds) and at approximately 1/5th the speed of normal playback in STD mode. Normal playback is restored when you move the cursor button up. If the frames are advanced one at a time in reverse when in HD mode, they will be shown in intervals of 0. 5 seconds. ª Operating with the remote control Press the E or D button. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP ª Operating with the remote control 1 Press the ; button. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP 2 Press the E or D button. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP VQT1G66 81 Playback To adjust the volume Adjust the speaker volume during playback. 3 Select the scene to be played back. To return to playing back all the scenes Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [VIEW ALL] and press the cursor button. When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession. STD mode ¬ Rotate the mode dial to select . 1 Press the The deleted scenes cannot be restored. (HD mode) The remaining space on DVD-RW, DVD-R and DVD-R DL will not increase even if scenes are deleted. (STD mode) Scenes on DVD-RW (Video format), DVD-R and DVD-R DL cannot be deleted. button while the thumbnail view screen is displayed. Deleting scenes one at a time HD mode ¬ Rotate the mode dial to select and then select the [ ] or [ ] tab. STD mode ¬ Rotate the mode dial to select . 2 Move the cursor button up or down to select [ALL SCENES] (HD mode)/[ALL] (STD mode) or [SELECT] and press the cursor button. 1 Press the playback. button during 2 When the confirmation message appears, select [YES], then press the cursor button. When [ALL SCENES] (HD mode)/[ALL] (STD mode) is selected, the following scenes except the protected scenes will be deleted. jWhen [PLAY MODE] is set to [VIEW ALL]: All the scenes on the disc or SD card jWhen [PLAY MODE] is set to [BY DATE]: All the scenes selected by date VQT1G66 85 Editing 3 (Only when [SELECT] is selected in step 2) Select the scene to be deleted, then press the cursor button. If you delete scenes recorded on other products with this unit, all the data related to the scenes may be deleted. (STD mode) It may not be possible to delete scenes that have been divided. Dividing a scene to delete This is for dividing a scene into two to delete an unnecessary portion. The selected scene is encircled by a red frame. When the cursor button is pressed again, the selected scene will be cancelled. Up to 99 scenes (HD mode)/8 scenes (STD mode) can be set in succession. VIDEO 4 (Only when [SELECT] is selected in step 2) Press the button. To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. 5 When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) HD mode ¬ Rotate the mode dial to select and then select the [ ] or [ ] tab. STD mode ¬ Rotate the mode dial to select . To continue deleting other scenes Repeat steps 3-5. 1 Press the MENU button, then select [EDIT SCENE] # [DIVIDE] # [SET] (HD mode) or [YES] (STD mode) and press the cursor button. MENU To complete editing Press the MENU button. You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] and then selecting [ALL SCENES] (HD mode)/[ALL] (STD mode) or [SELECT]. To delete an unwanted part of a scene, divide the scene first, and then delete the unnecessary part. [. . . ] Adjusts so that the vertical lines of a subject are seen more clearly. Attempts to bring an object with higher contrast into focus. Due to these characteristics, auto focus does not work correctly in the following situations. Record pictures in the manual focus mode. [. . . ]