User manual PANASONIC HDCTM10

[. . . ] Operating Instructions High Definition Video Camera Model No. HDC-SD10 HDC-TM10 Before use, please read these instructions completely. Please also refer to Operating Instructions (PDF format) recorded on the CD-ROM containing the Operating Instructions (supplied). You can learn about advanced operation methods and check the Troubleshooting. VQT2D12 Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. [. . . ] Also, do not use the AC cable from other equipment with this unit. A DC output terminal 1 2 3 Connect the AC cable to the AC adaptor and the AC outlet. Insert the DC cable. Always use the supplied AC adaptor or a genuine Panasonic AC adaptor (VW-AD21E-K; optional). When removing the AC adaptor, be sure to hold down the power button until the status indicator goes off. Then remove the AC adaptor. (ENG) VQT2D12 13 Preparation Setup 2 Preparation of SD cards This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. When using an SDHC Memory Card on another device, confirm that the device supports the SDHC Memory Card. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording. Motion picture recording The following models of Panasonic SD cards can be used. The recording may suddenly stop during motion picture recording depending on the SD card you use. Still picture recording Can be used. Card type Capacity 8 MB 16 MB 32 MB 64 MB 128 MB 256 MB 512 MB 1 GB 2 GB 4 GB 6 GB SD Memory Card RP-SDV01G RP-SDV02G, RP-SDM02G, RP-SDP02G RP-SDV04G, RP-SDM04G, RP-SDW04G, RP-SDP04G RP-SDM06G RP-SDV08G, RP-SDW08G, RP-SDP08G RP-SDM12G, RP-SDP12G RP-SDV16G, RP-SDW16G, RP-SDP16G RP-SDV32G, RP-SDW32G SDHC Memory Card 8 GB 12 GB 16 GB 32 GB * The SD Speed Class Rating is the speed standard for successive writes. Please confirm the latest information about SD Memory Cards/SDHC Memory Cards that can be used for motion picture recording on the following website. http://panasonic. jp/support/global/cs/e_cam (This website is in English only. ) 4 GB or more Memory Cards that do not have the SDHC logo are not based on SD Memory Card Specifications. When the write-protect switch A on SD card is locked, no recording, deletion or editing will be possible on the card. Keep the Memory Card out of reach of children to prevent swallowing. 32 14 VQT2D12 (ENG) Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 29) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. Caution: When the SD card is removed while the access lamp is lit, this unit may malfunction or the data recorded on the SD card may be lost. Access lamp [ACCESS] A When this unit is accessing the SD card or built-in memory, the access lamp lights up. 1 Open the SD card cover by sliding the OPEN lever B. While sliding the lever, push up on the SD card cover to open. 2 Insert/remove the SD card. Face the terminal side C in the direction shown in the illustration and press it straight in as far as it will go. Press the centre of the SD card and then pull it straight out. 3 Return the SD card cover to its original position and press down to close. Securely close it until it clicks. Do not touch the terminals on the back of the SD card. Do not apply strong shocks, bend, or drop the SD card. Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card. When the card access lamp is lit, do not: j Remove the SD card j Turn the unit off j Insert and remove the USB cable j Expose the unit to vibrations or shock Performing the above while the lamp is on may result in damage to data/SD card or this unit. Do not expose the terminals of the SD card to water, garbage or dust. [. . . ] (It is not necessary to connect the yellow plug. ) Do not use any other AV cables except the supplied one. 2 Select the video input on the TV. Example: Select the [HDMI] channel with a HDMI mini cable. Select the [Component] channel with a component cable. Select the [Video 2] channel with an AV cable. (The name of the channel may differ depending on the connected TV. ) 3 Change the mode to Cables to play back. Reference items Connecting with a HDMI mini cable Playback using VIERA Link (HDAVI ControlTM) Connecting with the component cable The image and audio are output on the TV. A HDMI mini cable (optional) B Component cable (supplied) If the image or audio from this unit does not appear on the TV Check that the plugs are inserted as far as they go. [. . . ]