User manual PANASONIC HX-A100GN

[. . . ] HX-A100_VQT4X90_mst. book 1 ページ ２０１３年１月２２日　火曜日　午後８時８分 Basic Operating Instructions Wearable Camera Model No. HX-A100 Please read these instructions carefully before using this product, and save this manual for future use. This document explains basic operations of the unit. For more detailed explanation, please refer to “Operating Instructions (PDF format)” which is recorded in the enclosed CD-ROM. VQT4X90 GN until 2013/2/28 HX-A100_VQT4X90_mst. book 2 ページ ２０１３年１月２２日　火曜日　午後８時８分 Information for Your Safety WARNING: To reduce the risk of fire, electric shock or product damage, ≥ Do not let water or other liquids drip or splash inside the unit. ≥ Do not expose accessories (battery pack, battery charger, AC adaptor, SD memory card and etc. ) to rain, moisture, dripping or splashing. [. . . ] It can be charged, but it may take a few hours to complete the charging normally. 2 second intervals when normal charging resumes. Even in such cases, it may start flashing in approx. 4 second intervals until charging is completed depending on the conditions of use. VQT4X90 15 HX-A100_VQT4X90_mst. book 16 ページ ２０１３年１月２２日　火曜日　午後８時８分 Recording to a card This unit can record motion pictures or still pictures to a microSD card. Cards that you can use with this unit Use microSD Memory Card (512 MB/1 GB/2 GB) or microSDHC Memory Card (4 GB/8 GB/ 16 GB/32 GB) conforming to Class 4*2 or higher of the SD Speed Class Rating*1 for motion picture recording. ≥ Operation of microSD cards other than described above is not guaranteed. *1 SD Speed Class Rating is the speed standard regarding continuous writing. e. g. : *2 Use microSD cards conforming to Class 6 or higher of the SD Speed Class Rating for “Slow motion mode”. If you use microSD cards conforming to Class 4 or less of that, the recording may stop suddenly. ≥ Please check the latest information on the support website below. http://panasonic. jp/support/global/cs/e_cam/index. html (This website is in English only. ) ≥ Keep the Memory Card out of reach of children to prevent swallowing. Inserting/removing a microSD card Caution: Check that the access lamp A has gone off. ≥ When this unit is accessing the microSD card (such as recognition, recording, playback and deletion), the access lamp lights up. C B C: Unlocked when the red indicator is visible  A D 1 Slide the LOCK switch B to the left to unlock the side cover and slide the side cover downward to open it and then insert (remove) the microSD card into (from) the card slot. ≥ Face the terminal side D upward and press it straight in as far as it will go. ≥ Press the centre of the microSD card and then pull it straight out. 2 Close the side cover and slide the LOCK switch B to the right to lock it. ≥ Close the side cover and slide it upward and then lock it. ≥ Securely close it until it clicks. 16 VQT4X90 HX-A100_VQT4X90_mst. book 17 ページ ２０１３年１月２２日　火曜日　午後８時８分 When using a microSD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the microSD card. When the microSD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. ≥ When the microSD card is removed, a notification sound rings, and the access lamp flashes fast. (a state in which a microSD card is not inserted) ≥ Do not touch the terminals on the back of the microSD card. ≥ Do not apply strong shocks, bend, or drop the microSD card. ≥ Electrical noise, static electricity or the failure of this unit or the microSD card may damage or erase the data stored on the microSD card. ≥ Do not expose the terminals of the microSD card to water, dirt or dust. ≥ Do not place microSD cards in the following areas: j In direct sunlight j In very dusty or humid areas j Near a heater j Locations susceptible to significant difference in temperature (condensation can occur. ) j Where static electricity or electromagnetic waves occur ≥ About disposing of or giving away the microSD card. (Refer to the Operating Instructions (PDF format)) ∫ About the access lamp ≥ When the access lamp is lit, do not: j Remove the microSD card j Turn this unit off j Insert and remove the USB cable j Expose this unit to vibrations or shock Performing the above while the lamp is on may result in damage to data/microSD card or this unit. Turn this unit on/off Press the power button to turn on this unit. The power lamp is turned on. To turn off this unit Hold down the power button until the power lamp goes off. Proceed to “Connecting directly with a smartphone” (l 19) and “Setting up with Setup Wizard” (l 21) to finish the setup of this unit. [. . . ] ≥ DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance. ≥ Other names of systems and products mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers who developed the system or product concerned. VQT4X90 29 HX-A100_VQT4X90_mst. book 30 ページ ２０１３年１月２２日　火曜日　午後８時８分 Limited Warranty (ONLY FOR AUSTRALIA) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. [. . . ]