User manual PANASONIC HX-A500GH

[. . . ] Operating Instructions Wearable Camera Model No. HX-A500 Please read these instructions carefully before using this product, and save this manual for future use. SQW0004 until 2014/5/12 Contents Preparation (Important) About the Waterproof/ Dustproof. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Read this first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 What you can do with this unit . . . . . . . . . . . . . . . . . . . . . 9 Names and Functions of Main Parts . . . . . . . . . . [. . . ] http://www. ustream. tv/ ≥ Operation cannot be guaranteed on future USTREAM services and updates. The service content and screens which can be used are subject to change without prior notice. (This service is current as of April 2014) 3 4 Acquire a “LUMIX CLUB” Login ID/Password. Use linked services with “LUMIX CLUB”. ≥ When you connect this unit to a wireless access point (l 59), you can acquire a “LUMIX CLUB” Login ID/Password with this unit. (l 68) To use the live broadcasting, access following website. http://lumixclub. panasonic. net/eng/c/ ≥ Log in to the “LUMIX CLUB” and register/set up the USTREAM on WEB service link setup. 5 ≥ ≥ ≥ * Set up a Wi-Fi connection between this unit and the wireless access point. * [Easy Connection (WPS)] (l 59) Searching for wireless access points to set up a connection (l 60) Setting up a connection manually (l 62) This operation is not possible while this unit is recording. When the Wi-Fi connection is complete, proceed to “Broadcasting live”. - 49 - Broadcasting live Set [Wi-Fi MODE] to [LIVE CAST]. (l 42) ≥ Confirm that the Wi-Fi mode has started up in [LIVE CAST]. ≥ If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them according to the screen. ≥ Select [Change AP] and press the joystick, you can switch the wireless access point to another one that has been registered to this unit. ≥ When the connection is made correctly, the screen of this unit switches to [LIVE CAST]. ∫ To send e-mails You can send e-mails containing such information as the USTREAM channel name or the scheduled broadcast date. ≥ This unit can only set the scheduled broadcast date. (l 52) For other settings, set them on the “LUMIX CLUB”. ≥ On the “LUMIX CLUB”, register the destination addresses of the e-mail in advance. 1 2 Press the joystick to display the [LIVE CAST] menu. Select [Send E-mail], then press the joystick. ∫ To start the live broadcast 1 2 Press the joystick to display the [LIVE CAST] menu. Select [Start Live Cast], then press the joystick. ≥ The Wi-Fi mode icon will change to (l 51) ≥ If you press the recording start/stop button, you can simultaneously record the broadcast to this unit. ∫ To stop the live broadcast 1 2 Press the joystick to display the [LIVE CAST] menu. Select [Stop Live Cast], then press the joystick. (l 51) ≥ The Wi-Fi mode icon will change to To exit [LIVE CAST]: Move the joystick left. ≥ The message is displayed. Select [YES], then press the joystick to exit. - 50 - ∫ Screen displays during a live broadcast / 1h23m Wi-Fi mode icon Elapsed time of the live broadcast ≥ This is displayed during a live broadcast. Microphone setting ≥ The indication appears when [Microphone OFF] is set. ≥ In [LIVE CAST], [RECORDING MODE] will be set to [NORMAL SHOOTING] and [PIXELS / FRAME RATE] will be set to [1920k1080/25p] even when they are set to the following options: j When [RECORDING MODE] is set to [SLOW MOTION], [LOOP RECORDING] or [PICTURE RECORDING] j When [PIXELS / FRAME RATE] is set to [3840k2160/25p], [1920k1080/50p] or [1280k720/ 50p] ≥ If this unit is on the e-mail sender block list of destination devices or if their firewall setting is enabled, the Wi-Fi function may not work correctly when you send an e-mail. If this occurs, check the network settings. ≥ Depending on the e-mail rejection or firewall setting at the destination address, e-mails may not be delivered. ≥ In the following cases, live broadcasting is not available. j When the clock setting is out of sync j When two cameras simultaneously perform live broadcasts at the same account (The camera that has started the broadcast first will be disconnected from the broadcast) ≥ When the live broadcast cannot be watched on a USTREAM application for TVs or smartphones, cancel the Password for the Programme, and restart the broadcast. [. . . ] If disassembled, repair is not possible. ≥ Disassemble after the battery runs out. ≥ If it cannot be removed smoothly, contact Panasonic’s Service Centre. ≥ Keep disassembled parts out of reach of children. 1 Open the side cover, and remove all of the 6 screws indicated in the figure below. 4 ≥ Use a cross-slot screwdriver (commercially available). Remove the 4 screws indicated in the figure below, and remove the heatsink D.  5 2 Remove the connector A of the flexible circuit board, and remove the circuit board on the front side (button side) of this unit. Remove the connector E of the camera unit, the built-in battery connector F, and the NFC flexible circuit board G, and lift up the circuit board.    6  3 Pull out the flexible circuit board B, and pull out the speaker connector C upwards. Remove the battery by using a screwdriver.  Regarding the handling of used batteries ≥ Insulate the terminals with cellophane tape or similar. [. . . ]