User manual PANASONIC KV-S3065CW

[. . . ] Model No. KV-S3065CL / KV-S3065CW These instructions contain information on operating the scanner. Before reading these instructions, please read the installation manual enclosed with this unit. Please carefully read these instructions, the enclosed installation manual and maintenance manual. Keep all documentation in a safe place for future reference. [. . . ] the the the the When scanning documents with a thickness of 0. 2 mm to 1 mm, like folded documents, set the paper path selector to straight path. Paper path selector The paper path selector is located on the left side of the scanner. Setting the ADF / manual feed selector ¥ Single scanning When scanning a single sheet or several sheets, set the ADF / manual feed selector to "MANUAL". ¥ Continuous scanning Setting Position Status When double feeding occurs frequently or scanning a document with a rough face as in NCR paper 4 1 2 3 1 ADF ADJ. MANUAL 2 (Standard setting) 3 When scanning normal paper When scanning with smooth sided paper or a paper jam occurs with normal paper When a jam occurs at the paper feed component ADF / manual feed selector The ADF / manual feed selector is located on the left side of the scanner. 4 The ADF / manual feed selector must be set in the correct position for this setting to function properly. If double feed alarm beeps frequently, change the ADF / manual feed selector. If thin paper (with paper weight less than 50 g/m2) causes a paper jam frequently at the paper feed component, the optional roller exchange kit for thin paper (KV-SS018) should be used. 17 Others How to use the control sheet and separation sheet If the control sheet is used, the documents under the control sheet are scanned in accordance with the code on the control sheet regardless of scanning condition that is selected previously. Control sheet Multiple control sheets can be used. When using a control sheet, the application software required depends on the control sheet. Print out control sheets from the provided CDROM. Documents A Code im S p x le Documents B Cautions: Use the same size control sheet as the scanning document. When printing the control sheet, if the pattern falls in the area from the top side of the document to 25 mm, adjust the printer. Also, copy the control sheet so that the pattern lies in the center of the copy. Be careful not to get the control sheet dirty. Do not fold or crease the control sheet. Scanning will not be performed properly. For details on control sheet and separation sheet, refer to section 3. 35 Detect Control Sheet and section 3. 36 Detect File Separation Sheet in the PIE Reference Manual. Control sheet functions: Simplex Duplex Binary Dither Error diffusion Dynamic Threshold 256 level gray Color Function #1-#9 18 Changing the Reference Plate Setting You can choose a background color to be scanned from white (black) to black (white). The scanner comes from factory set to black. The reference plate (B) and reference plate (F) setting must be changed simultaneously. Reference plate setting 1 2 Turn the power off. Use your hand to pull the front door release towards you (1). Then open the front door completely (2). Front door 2 2 1 Front door release (Inside the front door. ) 3 1 Using your finger, move reference plate lever (B). 2 Using your finger, move reference plate lever (F). the the 1 Reference plate lever (B) Background color White Black Reference plate lever (F) 2 19 Changing the Reference Plate Setting 4 Close the front door. Push both sides of the front door down slowly until it clicks into place. 20 Clearing Paper Jams Torn documents, thin documents or documents that are creased on the top edge may cause paper jams. If a paper jam occurs, remove the jammed sheet according to the following procedure. Removing paper jams from the scanner Use your hand to pull the front door release towards you (1), open the front door (2) and pull the jammed document towards the front. Then close the front door. Push both sides of the front door down slowly until it clicks into place. Front door 2 2 1 Front door release (Inside the front door. ) Removing paper jams from the exit path If a jammed document appears at the exit path, open the front door and pull the document forward, then close the front door. Push both sides of the front door down slowly until it clicks into place. Exit path Front door 21 Cleaning the Unit Outside of the scanner Clean the unit at least once a month. 1 Turn the power off. [. . . ] jam occurs The ADF/manual feed selector is not set in the correct position. The document guides are not adjusted to the size of the document to be scanned. The document to be scanned is set aslant on the hopper tray. Right and left sides of the document to be scanned are not the same in height, because of curl and fold. [. . . ]