User manual PANASONIC KX-TD7690

[. . . ] 2. 4 GHz Portable Station Operating Instructions Model No. KX-TD7690 Thank you for purchasing the Panasonic KX-TD7690, 2. 4 GHz Portable Station. Please read this manual carefully before using this product and save this manual for future use. This manual is designed to be used with your Portable Station and a Panasonic KX-TDA series Business Telephone System. Charge the battery for about 6 hours before initial use. Document V ers ion: 2006-02 Before Initial Use Please read "IMPORTANT SAFETY INSTRUCTIONS" on page 45 before use. Registration Your Portable Station (PS) must be registered in the Business Telephone System and assigned an extension number before initial use. Accessories ( -included/ Charger (ETYKM288SM) -optional) AC adaptor (KX-TCA1) Battery (N4HUGLB00001) Pana sonic One Screws and Washers One Operating Instructions One Two Strap Carrying Case Headset * One One Option Option For extra orders, call toll-free 1-800-332-5368. [. . . ] Tone To leave a message waiting indication When the called extension is busy or does not answer 4 OR KEY Caller Message Waiting Select the key assigned as a MESSAGE button. SEL C. Tone To cancel a message waiting indication 7 To call back 0 0 extension no. C. Tone Called extension 7 KEY 0 2 OR Select the key assigned as a MESSAGE button. SEL To lock 7 7 1 C. Tone Extension Lock* To unlock 7 7 0 extension PIN (max. Tone * If an extension PIN has not been set for the PS, the extension cannot be locked. (Refer to the Business Telephone System User Manual) For further information, refer to the Business Telephone System User Manual. 33 Programming Changing the Initial Settings You can customize the PS by editing the settings found under "PS PROGRAM" in the menu list, as follows: MENU Enter a setting number. (See below. ) OR SEL SEL Press S1. Select "PS PROGRAM". CHNG Press S1. Select the desired main item. SEL Press S1. Select the desired sub item. Press S1. Select the new setting. Press S1. BACK To return to the previous menu, press . The unit will beep to indicate that the new settings have been saved. PS Program Menu Layout PS PROGRAM ANSWER SETTING 11 12 13 14 15 16 17 18 19 21 22 23 24 25 26 27 28 RING PATTERN-INT RING PATTERN-CO RING PATTERN-GRP VIBRATION&RING QUICK ANSWER AUTO ANSWER AUTO ANS DELAY CALL GROUP ANY KEY ANSWER BACKLIGHT BACKLIGHT TIME BACKLIGHT COLOR LANGUAGE STANDBY DISPLAY DATE/TIME DISPLY LCD CONTRAST CALLER ID DISPLY DISPLAY SETTING BEEP SETTING 31 KEY TONE 32 RANGE WARNING 41 42 43 44 51 52 53 54 55 56 DIRECTORY LOCK PS PASSWORD MEMORY CLEAR ALL PS-BOOK DEL REGISTRATION DELETE SYSTEM SYSTEM LOCK ACCESS SYSTEM CHANGE PIN TRUNK ACCESS CD SECURITY SETTING SYSTEM SETTING KEY EDIT 61 KEY ASSIGN 62 FCO LABEL EDIT 34 Programming Main Item ANSWER SETTING Sub Item RING PATTERN-INT Description Setting* Setting no. RING PATTERN-CO Select the ringer type for each type of call (intercom, outside, and group). 6 ringer tones and 4 melodies are available. Ringer Pattern no. 11 12 Ringer Pattern 1 (Bell 1) RING PATTERN-GRP 13 VIBRATION&RING Select whether to have the PS vibrate when ringing. OFF Ring&VIB (Ring and vibrate at the same time) VIB RING (Vibrate for 5 seconds then ring) 14 QUICK ANSWER You can answer a call by just lifting the PS off the charger. Select the type of calls to be automatically answered when AUTO ANSWER is turned on. (See page 11. ) ON 15 OFF INT ONLY (Intercom calls only) AUTO ANSWER 16 INT/CO (All calls) * The default setting is shown here in gray. 35 Programming Main Item ANSWER SETTING Sub Item AUTO ANS DELAY Description Setting* Setting no. Select the number of seconds (6-20 sec. ) before a call is automatically answered, when AUTO ANSWER is turned on. You can set the ringer, LED, vibration, and display backlight for calls from someone stored in one of groups. A group's settings can also be returned to the default. Press SEL to select a group, then press . The following five items will be displayed. Select a ring pattern for the group selected above. When set to CO/GRP-PATTERN, the ringer chosen in RING PATTERN-CO (setting number 12) will be used. Select an LED pattern for the group selected above. When set to CO/GRP-BLINK, the LED will light as shown on page 19. Select a vibration pattern for the group selected above. 6s 17 _s CALL GROUP Select a group (0-9) RING PATTERN CO/GRPPATTERN Ringer Pattern no. CO/GRPBLINK LED PATTERN 18 LED Pattern no. SINGLE Vibration Pattern no. VIB PATTERN LCD BACKLIGHT Select an LCD backlight color for the group selected above. [. . . ] Consult your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. 46 Important Information The software contained in this equipment to allow user access to the network must be upgraded to recognize newly established network area codes and exchange codes as they are placed into service. Failure to upgrade the premises systems or peripheral equipment to recognize the new codes as they are established will restrict the customer and the customer's employees from gaining access to the network and to these codes. Environment -- do not place the unit in rooms where the temperature is less than 5 C (41 F) or greater than 40 C (104 F). Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight. [. . . ]